cookiecutter-django/{{cookiecutter.repo_name}}/README.rst

361 lines
15 KiB
ReStructuredText
Raw Normal View History

2013-08-16 14:55:28 +04:00
{{cookiecutter.project_name}}
==============================
{{cookiecutter.description}}
2013-08-29 10:57:20 +04:00
LICENSE: BSD
2013-08-19 22:32:07 +04:00
Settings
------------
{{cookiecutter.project_name}} relies extensively on environment settings which **will not work with Apache/mod_wsgi setups**. It has been deployed successfully with both Gunicorn/Nginx and even uWSGI/Nginx.
For configuration purposes, the following table maps the '{{cookiecutter.project_name}}' environment variables to their Django setting:
2015-05-19 19:20:52 +03:00
======================================= =========================== ============================================== ======================================================================
Environment Variable Django Setting Development Default Production Default
2015-05-19 19:20:52 +03:00
======================================= =========================== ============================================== ======================================================================
2015-07-06 13:43:26 +03:00
DJANGO_CACHES CACHES (default) locmem redis
DJANGO_DATABASES DATABASES (default) See code See code
DJANGO_DEBUG DEBUG True False
DJANGO_SECRET_KEY SECRET_KEY CHANGEME!!! raises error
DJANGO_SECURE_BROWSER_XSS_FILTER SECURE_BROWSER_XSS_FILTER n/a True
DJANGO_SECURE_SSL_REDIRECT SECURE_SSL_REDIRECT n/a True
DJANGO_SECURE_CONTENT_TYPE_NOSNIFF SECURE_CONTENT_TYPE_NOSNIFF n/a True
DJANGO_SECURE_FRAME_DENY SECURE_FRAME_DENY n/a True
DJANGO_SECURE_HSTS_INCLUDE_SUBDOMAINS HSTS_INCLUDE_SUBDOMAINS n/a True
DJANGO_SESSION_COOKIE_HTTPONLY SESSION_COOKIE_HTTPONLY n/a True
DJANGO_SESSION_COOKIE_SECURE SESSION_COOKIE_SECURE n/a False
2015-05-19 19:20:52 +03:00
DJANGO_DEFAULT_FROM_EMAIL DEFAULT_FROM_EMAIL n/a "{{cookiecutter.project_name}} <noreply@{{cookiecutter.domain_name}}>"
2015-08-30 22:12:21 +03:00
DJANGO_SERVER_EMAIL SERVER_EMAIL n/a "{{cookiecutter.project_name}} <noreply@{{cookiecutter.domain_name}}>"
2015-07-07 22:06:46 +03:00
DJANGO_EMAIL_SUBJECT_PREFIX EMAIL_SUBJECT_PREFIX n/a "[{{cookiecutter.project_name}}] "
2015-09-01 21:50:50 +03:00
DJANGO_ALLOWED_HOSTS ALLOWED_HOSTS ['*'] ['{{cookiecutter.domain_name}}']
2015-05-19 19:20:52 +03:00
======================================= =========================== ============================================== ======================================================================
2015-07-06 21:23:12 +03:00
The following table lists settings and their defaults for third-party applications:
======================================= =========================== ============================================== ======================================================================
Environment Variable Django Setting Development Default Production Default
======================================= =========================== ============================================== ======================================================================
2015-07-07 22:06:46 +03:00
DJANGO_AWS_ACCESS_KEY_ID AWS_ACCESS_KEY_ID n/a raises error
DJANGO_AWS_SECRET_ACCESS_KEY AWS_SECRET_ACCESS_KEY n/a raises error
DJANGO_AWS_STORAGE_BUCKET_NAME AWS_STORAGE_BUCKET_NAME n/a raises error
2015-07-27 18:42:23 +03:00
{% if cookiecutter.use_sentry == "y" -%}DJANGO_SENTRY_DSN SENTRY_DSN n/a raises error
DJANGO_SENTRY_CLIENT SENTRY_CLIENT n/a raven.contrib.django.raven_compat.DjangoClient
DJANGO_SENTRY_LOG_LEVEL SENTRY_LOG_LEVEL n/a logging.INFO{%- endif %}
2015-07-07 22:06:46 +03:00
DJANGO_MAILGUN_API_KEY MAILGUN_ACCESS_KEY n/a raises error
DJANGO_MAILGUN_SERVER_NAME MAILGUN_SERVER_NAME n/a raises error
2015-07-06 21:23:12 +03:00
======================================= =========================== ============================================== ======================================================================
Getting up and running
----------------------
Basics
^^^^^^
The steps below will get you up and running with a local development environment. We assume you have the following installed:
* pip
* virtualenv
* PostgreSQL
First make sure to create and activate a virtualenv_, then open a terminal at the project root and install the requirements for local development::
$ pip install -r requirements/local.txt
.. _virtualenv: http://docs.python-guide.org/en/latest/dev/virtualenvs/
Create a local PostgreSQL database::
$ createdb {{ cookiecutter.repo_name }}
Run ``migrate`` on your new database::
$ python manage.py migrate
You can now run the ``runserver_plus`` command::
$ python manage.py runserver_plus
Open up your browser to http://127.0.0.1:8000/ to see the site running locally.
Setting Up Your Users
^^^^^^^^^^^^^^^^^^^^^
To create a **normal user account**, just go to Sign Up and fill out the form. Once you submit it, you'll see a "Verify Your E-mail Address" page. Go to your console to see a simulated email verification message. Copy the link into your browser. Now the user's email should be verified and ready to go.
To create an **superuser account**, use this command::
$ python manage.py createsuperuser
For convenience, you can keep your normal user logged in on Chrome and your superuser logged in on Firefox (or similar), so that you can see how the site behaves for both kinds of users.
2015-08-04 08:20:12 +03:00
Test coverage
^^^^^^^^^^^^^
To run the tests, check your test coverage, and generate an HTML coverage report::
$ coverage run manage.py test
$ coverage html
$ open htmlcov/index.html
2015-08-04 08:20:12 +03:00
Live reloading and Sass CSS compilation
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you'd like to take advantage of live reloading and Sass / Compass CSS compilation you can do so with a little bit of prep work.
Make sure that nodejs_ is installed. Then in the project root run::
$ npm install
.. _nodejs: http://nodejs.org/download/
If you don't already have it, install `compass` (doesn't hurt if you run this command twice)::
gem install compass
Now you just need::
$ grunt serve
The base app will now run as it would with the usual ``manage.py runserver`` but with live reloading and Sass compilation enabled.
To get live reloading to work you'll probably need to install an `appropriate browser extension`_
.. _appropriate browser extension: http://feedback.livereload.com/knowledgebase/articles/86242-how-do-i-install-and-use-the-browser-extensions-
{% if cookiecutter.use_celery == "y" %}
Celery
^^^^^^
This app comes with Celery.
To run a celery worker:
.. code-block:: bash
cd {{cookiecutter.repo_name}}
celery -A {{cookiecutter.repo_name}}.taskapp worker -l info
Please note: For Celerys import magic to work, it is important *where* the celery commands are run. If you are in the same folder with *manage.py*, you should be right.
{% endif %}
2015-07-16 07:21:06 +03:00
{% if cookiecutter.use_maildump == "y" %}
Email Server
^^^^^^^^^^^^
In development, it is often nice to be able to see emails that are being sent from your application. For this purpose,
a Grunt task exists to start an instance of `maildump`_ which is a local SMTP server with an online interface.
.. _maildump: https://github.com/ThiefMaster/maildump
Make sure you have nodejs installed, and then type the following::
$ grunt start-email-server
This will start an email server. The project is setup to deliver to the email server by default. To view messages
that are sent by your application, open your browser to http://127.0.0.1:1080
To stop the email server::
$ grunt stop-email-server
The email server listens on 127.0.0.1:1025
2015-07-16 07:21:06 +03:00
{% endif %}
2015-07-27 18:42:23 +03:00
{% if cookiecutter.use_sentry == "y" %}
2015-07-27 18:42:23 +03:00
Sentry
^^^^^^
Sentry is an error logging aggregator service. You can sign up for a free account at http://getsentry.com or download and host it yourself.
The system is setup with reasonable defaults, including 404 logging and integration with the WSGI application.
You must set the DSN url in production.
2015-07-27 18:42:23 +03:00
{% endif %}
It's time to write the code!!!
Running end to end integration tests
------------------------------------
N.B. The integration tests will not run on Windows.
To install the test runner::
$ pip install hitch
To run the tests, enter the {{cookiecutter.repo_name}}/tests directory and run the following commands::
$ hitch init
Then run the stub test::
$ hitch test stub.test
This will download and compile python, postgres and redis and install all python requirements so the first time it runs it may take a while.
Subsequent test runs will be much quicker.
The testing framework runs Django, Celery (if enabled), Postgres, HitchSMTP (a mock SMTP server), Firefox/Selenium and Redis.
2013-08-19 22:32:07 +04:00
Deployment
----------
2013-08-19 22:32:07 +04:00
2015-09-01 07:25:23 +03:00
We providing tools and instructions for deploying using Docker and Heroku.
Heroku
^^^^^^
2015-09-03 21:52:59 +03:00
.. image:: https://www.herokucdn.com/deploy/button.png
:target: https://heroku.com/deploy
Run these commands to deploy the project to Heroku:
.. code-block:: bash
heroku create --buildpack https://github.com/heroku/heroku-buildpack-python
heroku addons:create heroku-postgresql:hobby-dev
heroku pg:backups schedule --at '02:00 America/Los_Angeles' DATABASE_URL
heroku pg:promote DATABASE_URL
2015-07-06 13:43:26 +03:00
heroku addons:create heroku-redis:hobby-dev
2015-07-06 21:23:12 +03:00
heroku addons:create mailgun
heroku config:set DJANGO_SECRET_KEY=`openssl rand -base64 32`
heroku config:set DJANGO_SETTINGS_MODULE='config.settings.production'
heroku config:set DJANGO_ALLOWED_HOSTS='.herokuapp.com'
heroku config:set DJANGO_AWS_ACCESS_KEY_ID=YOUR_AWS_ID_HERE
heroku config:set DJANGO_AWS_SECRET_ACCESS_KEY=YOUR_AWS_SECRET_ACCESS_KEY_HERE
heroku config:set DJANGO_AWS_STORAGE_BUCKET_NAME=YOUR_AWS_S3_BUCKET_NAME_HERE
2015-07-07 22:29:41 +03:00
heroku config:set DJANGO_MAILGUN_SERVER_NAME=YOUR_MALGUN_SERVER
heroku config:set DJANGO_MAILGUN_API_KEY=YOUR_MAILGUN_API_KEY
2015-08-30 22:12:21 +03:00
heroku config:set PYTHONHASHSEED=random
2015-08-30 22:12:21 +03:00
git push heroku master
heroku run python manage.py migrate
heroku run python manage.py check --deploy
heroku run python manage.py createsuperuser
heroku open
2015-07-21 11:42:31 +03:00
Docker
^^^^^^
**Warning**
2015-07-21 11:42:31 +03:00
Docker is evolving extremely fast, but it has still some rough edges here and there. Compose is currently (as of version 1.4)
not considered production ready. That means you won't be able to scale to multiple servers and you won't be able to run
zero downtime deployments out of the box. Consider all this as experimental until you understand all the implications
to run docker (with compose) on production.
2015-07-21 11:42:31 +03:00
**Run your app with docker-compose**
2015-07-21 11:42:31 +03:00
Prerequisites:
* docker (tested with 1.8)
* docker-compose (tested with 0.4)
Before you start, check out the `docker-compose.yml` file in the root of this project. This is where each component
of this application gets its configuration from. It consists of a `postgres` service that runs the database, `redis`
for caching, `nginx` as reverse proxy and last but not least the `django` application run by gunicorn.
{% if cookiecutter.use_celery == 'y' -%}
Since this application also runs Celery, there are two more services with a service called `celeryworker` that runs the
celery worker process and `celerybeat` that runs the celery beat process.
{% endif %}
2015-08-20 06:18:08 +03:00
All of these services except `redis` rely on environment variables set by you. There is an `env.example` file in the
root directory of this project as a starting point. Add your own variables to the file and rename it to `.env`. This
file won't be tracked by git by default so you'll have to make sure to use some other mechanism to copy your secret if
you are relying solely on git.
By default, the application is configured to listen on all interfaces on port 80. If you want to change that, open the
`docker-compose.yml` file and replace `0.0.0.0` with your own ip. If you are using `nginx-proxy`_ to run multiple
application stacks on one host, remove the port setting entirely and add `VIRTUAL_HOST={{cookiecutter.domain_name}}` to your env file.
This pass all incoming requests on `nginx-proxy` to the nginx service your application is using.
.. _nginx-proxy: https://github.com/jwilder/nginx-proxy
Postgres is saving its database files to `/data/{{cookiecutter.repo_name}}/postgres` by default. Change that if you wan't
something else and make sure to make backups since this is not done automatically.
To get started, pull your code from source control (don't forget the `.env` file) and change to your projects root
directory.
You'll need to build the stack first. To do that, run::
docker-compose build
Once this is ready, you can run it with::
2015-07-21 11:42:31 +03:00
docker-compose up
To run a migration, open up a second terminal and run::
docker-compose run django python manage.py migrate
To create a superuser, run::
docker-compose run django python manage.py createsuperuser
If you need a shell, run::
docker-compose run django python manage.py shell_plus
2015-08-30 22:17:46 +03:00
To get an output of all running containers.
To check your logs, run::
docker-compose logs
If you want to scale your application, run::
docker-compose scale django=4
docker-compose scale celeryworker=2
**Don't run the scale command on postgres or celerybeat**
Once you are ready with your initial setup, you wan't to make sure that your application is run by a process manager to
survive reboots and auto restarts in case of an error. You can use the process manager you are most familiar with. All
it needs to do is to run `docker-compose up` in your projects root directory.
If you are using `supervisor`, you can use this file as a starting point::
[program:{{cookiecutter.repo_name}}]
command=docker-compose up
directory=/path/to/{{cookiecutter.repo_name}}
redirect_stderr=true
autostart=true
autorestart=true
priority=10
Place it in `/etc/supervisor/conf.d/{{cookiecutter.repo_name}}.conf` and run::
supervisorctl reread
supervisorctl start {{cookiecutter.repo_name}}
To get the status, run::
supervisorctl status
If you have errors, you can always check your stack with `docker-compose`. Switch to your projects root directory and run::
docker-compose ps