Merge pull request #3 from pydanny/master

Merge from Pydanny
This commit is contained in:
Jimmy Gitonga 2019-03-14 02:06:09 +03:00 committed by GitHub
commit da9d14ca2b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
19 changed files with 181 additions and 311 deletions

View File

@ -57,6 +57,7 @@ Listed in alphabetical order.
Andrew Mikhnevich `@zcho`_
Andy Rose
Anna Callahan `@jazztpt`_
Anna Sidwell `@takkaria`_
Antonia Blair `@antoniablair`_ @antoniablairart
Anuj Bansal `@ahhda`_
Arcuri Davide `@dadokkio`_
@ -70,6 +71,7 @@ Listed in alphabetical order.
Bo Lopker `@blopker`_
Bouke Haarsma
Brent Payne `@brentpayne`_ @brentpayne
Bartek `@btknu`
Burhan Khalid            `@burhan`_                   @burhan
Carl Johnson `@carlmjohnson`_ @carlmjohnson
Catherine Devlin `@catherinedevlin`_
@ -179,6 +181,7 @@ Listed in alphabetical order.
Denis Bobrov `@delneg`_
Philipp Matthies `@canonnervio`_
Vadim Iskuchekov `@Egregors`_ @egregors
Keith Bailey `@keithjeb`_
========================== ============================ ==============
.. _@a7p: https://github.com/a7p
@ -271,6 +274,7 @@ Listed in alphabetical order.
.. _@ssteinerX: https://github.com/ssteinerx
.. _@stepmr: https://github.com/stepmr
.. _@suledev: https://github.com/suledev
.. _@takkaria: https://github.com/takkaria
.. _@timfreund: https://github.com/timfreund
.. _@Travistock: https://github.com/Tavistock
.. _@trungdong: https://github.com/trungdong
@ -295,6 +299,8 @@ Listed in alphabetical order.
.. _@purplediane: https://github.com/purplediane
.. _@umrashrf: https://github.com/umrashrf
.. _@ahhda: https://github.com/ahhda
.. _@keithjeb: https://github.com/keithjeb
.. _@btknu: https://github.com/btknu
Special Thanks
~~~~~~~~~~~~~~

View File

@ -279,9 +279,9 @@ experience better.
Articles
---------
* `Using cookiecutter-django with Google Cloud Storage`_ - Mar. 12, 2019
* `cookiecutter-django with Nginx, Route 53 and ELB`_ - Feb. 12, 2018
* `cookiecutter-django and Amazon RDS`_ - Feb. 7, 2018
* `Deploying Cookiecutter-Django with Docker-Compose`_ - Oct. 19, 2017
* `Using Cookiecutter to Jumpstart a Django Project on Windows with PyCharm`_ - May 19, 2017
* `Exploring with Cookiecutter`_ - Dec. 3, 2016
* `Introduction to Cookiecutter-Django`_ - Feb. 19, 2016
@ -292,9 +292,9 @@ Articles
Have a blog or online publication? Write about your cookiecutter-django tips and tricks, then send us a pull request with the link.
.. _`Using cookiecutter-django with Google Cloud Storage`: https://ahhda.github.io/cloud/gce/django/2019/03/12/using-django-cookiecutter-cloud-storage.html
.. _`cookiecutter-django with Nginx, Route 53 and ELB`: https://msaizar.com/blog/cookiecutter-django-nginx-route-53-and-elb/
.. _`cookiecutter-django and Amazon RDS`: https://msaizar.com/blog/cookiecutter-django-and-amazon-rds/
.. _`Deploying Cookiecutter-Django with Docker-Compose`: http://adamantine.me/2017/10/19/deploying-cookiecutter-django-with-docker-compose/
.. _`Exploring with Cookiecutter`: http://www.snowboardingcoder.com/django/2016/12/03/exploring-with-cookiecutter/
.. _`Using Cookiecutter to Jumpstart a Django Project on Windows with PyCharm`: https://joshuahunter.com/posts/using-cookiecutter-to-jumpstart-a-django-project-on-windows-with-pycharm/

View File

@ -47,9 +47,7 @@ Run these commands to deploy the project to Heroku:
git push heroku master
heroku run python manage.py migrate
heroku run python manage.py createsuperuser
heroku run python manage.py collectstatic --no-input
heroku run python manage.py check --deploy

View File

@ -171,6 +171,16 @@ When developing locally you can go with MailHog_ for email testing provided ``us
.. _Mailhog: https://github.com/mailhog/MailHog/
.. _`CeleryTasks`:
Celery tasks in local development
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When not using docker Celery tasks are set to run in Eager mode, so that a full stack is not needed. When using docker the task
scheduler will be used by default.
If you need tasks to be executed on the main thread during development set CELERY_TASK_ALWAYS_EAGER = True in config/settings/local.py.
Possible uses could be for testing, or ease of profiling with DJDT.
.. _`CeleryFlower`:

View File

@ -118,6 +118,16 @@ In production, we have Mailgun_ configured to have your back!
.. _Mailgun: https://www.mailgun.com/
Celery
------
If the project is configured to use Celery as a task scheduler then by default tasks are set to run on the main thread
when developing locally. If you have the appropriate setup on your local machine then set
CELERY_TASK_ALWAYS_EAGER = False
in /config/settings/local.py
Sass Compilation & Live Reloading
---------------------------------

View File

@ -9,5 +9,6 @@ flake8==3.7.6
# Testing
# ------------------------------------------------------------------------------
tox==3.6.1
pytest==4.3.0
pytest==4.3.1
pytest-cookies==0.3.0
pyyaml==5.1

View File

@ -1,6 +1,7 @@
import os
import re
import sh
import yaml
import pytest
from binaryornot.check import is_binary
@ -85,3 +86,19 @@ def test_flake8_compliance(cookies):
sh.flake8(str(result.project))
except sh.ErrorReturnCode as e:
pytest.fail(e)
def test_travis_invokes_pytest(cookies, context):
context.update({"use_travisci": "y"})
result = cookies.bake(extra_context=context)
assert result.exit_code == 0
assert result.exception is None
assert result.project.basename == context["project_slug"]
assert result.project.isdir()
with open(f'{result.project}/.travis.yml', 'r') as travis_yml:
try:
assert yaml.load(travis_yml)['script'] == ['pytest']
except yaml.YAMLError as e:
pytest.fail(e)

View File

@ -3,10 +3,11 @@
USE_DOCKER=yes
IPYTHONDIR=/app/.ipython
{%- if cookiecutter.use_celery == 'y' %}
# Redis
# ------------------------------------------------------------------------------
REDIS_URL=redis://redis:6379/0
{% if cookiecutter.use_celery == 'y' %}
# Celery
# ------------------------------------------------------------------------------

View File

@ -9,3 +9,7 @@ before_install:
language: python
python:
- "3.6"
install:
- pip install -r requirements/local.txt
script:
- "pytest"

View File

@ -1,3 +1,4 @@
release: python manage.py migrate
web: gunicorn config.wsgi:application
{% if cookiecutter.use_celery == "y" -%}
worker: celery worker --app={{cookiecutter.project_slug}}.taskapp --loglevel=info

View File

@ -5,8 +5,10 @@ set -o pipefail
set -o nounset
{% if cookiecutter.use_celery == 'y' %}
# N.B. If only .env files supported variable expansion...
export CELERY_BROKER_URL="${REDIS_URL}"
{% endif %}
if [ -z "${POSTGRES_USER}" ]; then
base_postgres_image_default_user='postgres'

View File

@ -76,8 +76,10 @@ INSTALLED_APPS += ['django_extensions'] # noqa F405
# Celery
# ------------------------------------------------------------------------------
{% if cookiecutter.use_docker == 'n' -%}
# http://docs.celeryproject.org/en/latest/userguide/configuration.html#task-always-eager
CELERY_TASK_ALWAYS_EAGER = True
{%- endif %}
# http://docs.celeryproject.org/en/latest/userguide/configuration.html#task-eager-propagates
CELERY_TASK_EAGER_PROPAGATES = True

View File

@ -1,4 +0,0 @@
Deploy
========
This is where you describe how the project is deployed in production.

View File

@ -1,186 +0,0 @@
Developing with Docker
======================
You can develop your application in a `Docker`_ container for simpler deployment onto bare Linux machines later. This instruction assumes an `Amazon Web Services`_ EC2 instance, but it should work on any machine with Docker > 1.3 and `Docker compose`_ installed.
.. _Docker: https://www.docker.com/
.. _Amazon Web Services: http://aws.amazon.com/
.. _Docker compose: https://docs.docker.com/compose/
Setting up
^^^^^^^^^^
Docker encourages running one container for each process. This might mean one container for your web server, one for Django application and a third for your database. Once you're happy composing containers in this way you can easily add more, such as a `Redis`_ cache.
.. _Redis: http://redis.io/
The Docker compose tool (previously known as `fig`_) makes linking these containers easy. An example set up for your Cookiecutter Django project might look like this:
.. _fig: http://www.fig.sh/
::
webapp/ # Your cookiecutter project would be in here
Dockerfile
...
database/
Dockerfile
...
webserver/
Dockerfile
...
production.yml
Each component of your application would get its own `Dockerfile`_. The rest of this example assumes you are using the `base postgres image`_ for your database. Your database settings in `config/base.py` might then look something like:
.. _Dockerfile: https://docs.docker.com/reference/builder/
.. _base postgres image: https://registry.hub.docker.com/_/postgres/
.. code-block:: python
DATABASES = {
'default': {
'ENGINE': 'django.db.backends.postgresql_psycopg2',
'NAME': 'postgres',
'USER': 'postgres',
'HOST': 'database',
'PORT': 5432,
}
}
The `Docker compose documentation`_ explains in detail what you can accomplish in the `production.yml` file, but an example configuration might look like this:
.. _Docker compose documentation: https://docs.docker.com/compose/#compose-documentation
.. code-block:: yaml
database:
build: database
webapp:
build: webapp:
command: /usr/bin/python3.6 manage.py runserver 0.0.0.0:8000 # dev setting
# command: gunicorn -b 0.0.0.0:8000 wsgi:application # production setting
volumes:
- webapp/your_project_name:/path/to/container/workdir/
links:
- database
webserver:
build: webserver
ports:
- "80:80"
- "443:443"
links:
- webapp
We'll ignore the webserver for now (you'll want to comment that part out while we do). A working Dockerfile to run your cookiecutter application might look like this:
::
FROM ubuntu:14.04
ENV REFRESHED_AT 2015-01-13
# update packages and prepare to build software
RUN ["apt-get", "update"]
RUN ["apt-get", "-y", "install", "build-essential", "vim", "git", "curl"]
RUN ["locale-gen", "en_GB.UTF-8"]
# install latest python
RUN ["apt-get", "-y", "build-dep", "python3-dev", "python3-imaging"]
RUN ["apt-get", "-y", "install", "python3-dev", "python3-imaging", "python3-pip"]
# prepare postgreSQL support
RUN ["apt-get", "-y", "build-dep", "python3-psycopg2"]
# move into our working directory
# ADD must be after chown see http://stackoverflow.com/a/26145444/1281947
RUN ["groupadd", "python"]
RUN ["useradd", "python", "-s", "/bin/bash", "-m", "-g", "python", "-G", "python"]
ENV HOME /home/python
WORKDIR /home/python
RUN ["chown", "-R", "python:python", "/home/python"]
ADD ./ /home/python
# manage requirements
ENV REQUIREMENTS_REFRESHED_AT 2015-02-25
RUN ["pip3", "install", "-r", "requirements.txt"]
# uncomment the line below to use container as a non-root user
USER python:python
Running `sudo docker-compose -f production.yml build` will follow the instructions in your `production.yml` file and build the database container, then your webapp, before mounting your cookiecutter project files as a volume in the webapp container and linking to the database. Our example yaml file runs in development mode but changing it to production mode is as simple as commenting out the line using `runserver` and uncommenting the line using `gunicorn`.
Both are set to run on port `0.0.0.0:8000`, which is where the Docker daemon will discover it. You can now run `sudo docker-compose -f production.yml up` and browse to `localhost:8000` to see your application running.
Deployment
^^^^^^^^^^
You'll need a webserver container for deployment. An example setup for `Nginx`_ might look like this:
.. _Nginx: http://wiki.nginx.org/Main
::
FROM ubuntu:14.04
ENV REFRESHED_AT 2015-02-11
# get the nginx package and set it up
RUN ["apt-get", "update"]
RUN ["apt-get", "-y", "install", "nginx"]
# forward request and error logs to docker log collector
RUN ln -sf /dev/stdout /var/log/nginx/access.log
RUN ln -sf /dev/stderr /var/log/nginx/error.log
VOLUME ["/var/cache/nginx"]
EXPOSE 80 443
# load nginx conf
ADD ./site.conf /etc/nginx/sites-available/your_cookiecutter_project
RUN ["ln", "-s", "/etc/nginx/sites-available/your_cookiecutter_project", "/etc/nginx/sites-enabled/your_cookiecutter_project"]
RUN ["rm", "-rf", "/etc/nginx/sites-available/default"]
#start the server
CMD ["nginx", "-g", "daemon off;"]
That Dockerfile assumes you have an Nginx conf file named `site.conf` in the same directory as the webserver Dockerfile. A very basic example, which forwards traffic onto the development server or gunicorn for processing, would look like this:
::
# see http://serverfault.com/questions/577370/how-can-i-use-environment-variables-in-nginx-conf#comment730384_577370
upstream localhost {
server webapp_1:8000;
}
server {
location / {
proxy_pass http://localhost;
}
}
Running `sudo docker-compose -f production.yml build webserver` will build your server container. Running `sudo docker-compose -f production.yml up` will now expose your application directly on `localhost` (no need to specify the port number).
Building and running your app on EC2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
All you now need to do to run your app in production is:
* Create an empty EC2 Linux instance (any Linux machine should do).
* Install your preferred source control solution, Docker and Docker compose on the news instance.
* Pull in your code from source control. The root directory should be the one with your `production.yml` file in it.
* Run `sudo docker-compose -f production.yml build` and `sudo docker-compose -f production.yml up`.
* Assign an `Elastic IP address`_ to your new machine.
.. _Elastic IP address: https://aws.amazon.com/articles/1346
* Point your domain name to the elastic IP.
**Be careful with Elastic IPs** because, on the AWS free tier, if you assign one and then stop the machine you will incur charges while the machine is down (presumably because you're preventing them allocating the IP to someone else).
Security advisory
^^^^^^^^^^^^^^^^^
The setup described in this instruction will get you up-and-running but it hasn't been audited for security. If you are running your own setup like this it is always advisable to, at a minimum, examine your application with a tool like `OWASP ZAP`_ to see what security holes you might be leaving open.
.. _OWASP ZAP: https://www.owasp.org/index.php/OWASP_Zed_Attack_Proxy_Project

View File

@ -3,23 +3,17 @@
You can adapt this file completely to your liking, but it should at least
contain the root `toctree` directive.
Welcome to {{ cookiecutter.project_name }}'s documentation!
{{ cookiecutter.project_name }} Project Documentation
====================================================================
Contents:
Table of Contents:
.. toctree::
:maxdepth: 2
install
deploy
docker_ec2
tests
Indices and tables
==================
Indices & Tables
================
* :ref:`genindex`
* :ref:`modindex`

View File

@ -1,4 +0,0 @@
Install
=========
This is where you write how to get a new laptop to run this project.

View File

@ -1,63 +1,70 @@
////////////////////////////////
// Setup
////////////////////////////////
////////////////////////////////
//Setup//
////////////////////////////////
// Gulp and package
const { src, dest, parallel, series, watch } = require('gulp')
const pjson = require('./package.json')
// Plugins
var gulp = require('gulp'),
pjson = require('./package.json'),
gutil = require('gulp-util'),
sass = require('gulp-sass'),
autoprefixer = require('gulp-autoprefixer'),
cssnano = require('gulp-cssnano'),
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}
concat = require('gulp-concat'),
{% endif %}
rename = require('gulp-rename'),
del = require('del'),
plumber = require('gulp-plumber'),
pixrem = require('gulp-pixrem'),
uglify = require('gulp-uglify'),
imagemin = require('gulp-imagemin'),
spawn = require('child_process').spawn,
runSequence = require('run-sequence'),
browserSync = require('browser-sync').create(),
reload = browserSync.reload;
const autoprefixer = require('autoprefixer')
const browserSync = require('browser-sync').create()
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}
const concat = require('gulp-concat')
{% endif %}
const cssnano = require ('cssnano')
const imagemin = require('gulp-imagemin')
const pixrem = require('pixrem')
const plumber = require('gulp-plumber')
const postcss = require('gulp-postcss')
const reload = browserSync.reload
const rename = require('gulp-rename')
const sass = require('gulp-sass')
const spawn = require('child_process').spawn
const uglify = require('gulp-uglify-es').default
// Relative paths function
var pathsConfig = function (appName) {
this.app = "./" + (appName || pjson.name);
var vendorsRoot = 'node_modules/';
function pathsConfig(appName) {
this.app = `./${pjson.name}`
const vendorsRoot = 'node_modules'
return {
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}
bootstrapSass: vendorsRoot + '/bootstrap/scss',
bootstrapSass: `${vendorsRoot}/bootstrap/scss`,
vendorsJs: [
vendorsRoot + 'jquery/dist/jquery.slim.js',
vendorsRoot + 'popper.js/dist/umd/popper.js',
vendorsRoot + 'bootstrap/dist/js/bootstrap.js'
`${vendorsRoot}/jquery/dist/jquery.slim.js`,
`${vendorsRoot}/popper.js/dist/umd/popper.js`,
`${vendorsRoot}/bootstrap/dist/js/bootstrap.js`,
],
{% endif %}
app: this.app,
templates: this.app + '/templates',
css: this.app + '/static/css',
sass: this.app + '/static/sass',
fonts: this.app + '/static/fonts',
images: this.app + '/static/images',
js: this.app + '/static/js'
templates: `${this.app}/templates`,
css: `${this.app}/static/css`,
sass: `${this.app}/static/sass`,
fonts: `${this.app}/static/fonts`,
images: `${this.app}/static/images`,
js: `${this.app}/static/js`,
}
};
}
var paths = pathsConfig();
var paths = pathsConfig()
////////////////////////////////
//Tasks//
// Tasks
////////////////////////////////
// Styles autoprefixing and minification
gulp.task('styles', function() {
return gulp.src(paths.sass + '/project.scss')
function styles() {
var processCss = [
autoprefixer(), // adds vendor prefixes
pixrem(), // add fallbacks for rem units
]
var minifyCss = [
cssnano({ preset: 'default' }) // minify result
]
return src(`${paths.sass}/project.scss`)
.pipe(sass({
includePaths: [
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}
@ -67,72 +74,86 @@ gulp.task('styles', function() {
]
}).on('error', sass.logError))
.pipe(plumber()) // Checks for errors
.pipe(autoprefixer({browsers: ['last 2 versions']})) // Adds vendor prefixes
.pipe(pixrem()) // add fallbacks for rem units
.pipe(gulp.dest(paths.css))
.pipe(postcss(processCss))
.pipe(dest(paths.css))
.pipe(rename({ suffix: '.min' }))
.pipe(cssnano()) // Minifies the result
.pipe(gulp.dest(paths.css));
});
.pipe(postcss(minifyCss)) // Minifies the result
.pipe(dest(paths.css))
}
// Javascript minification
gulp.task('scripts', function() {
return gulp.src(paths.js + '/project.js')
function scripts() {
return src(`${paths.js}/project.js`)
.pipe(plumber()) // Checks for errors
.pipe(uglify()) // Minifies the js
.pipe(rename({ suffix: '.min' }))
.pipe(gulp.dest(paths.js));
});
.pipe(dest(paths.js))
}
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}
// Vendor Javascript minification
gulp.task('vendor-scripts', function() {
return gulp.src(paths.vendorsJs)
function vendorScripts() {
return src(paths.vendorsJs)
.pipe(concat('vendors.js'))
.pipe(gulp.dest(paths.js))
.pipe(dest(paths.js))
.pipe(plumber()) // Checks for errors
.pipe(uglify()) // Minifies the js
.pipe(rename({ suffix: '.min' }))
.pipe(gulp.dest(paths.js));
});
.pipe(dest(paths.js))
}
{% endif %}
// Image compression
gulp.task('imgCompression', function(){
return gulp.src(paths.images + '/*')
function imgCompression() {
return src(`${paths.images}/*`)
.pipe(imagemin()) // Compresses PNG, JPEG, GIF and SVG images
.pipe(gulp.dest(paths.images))
});
.pipe(dest(paths.images))
}
// Run django server
gulp.task('runServer', function(cb) {
var cmd = spawn('python', ['manage.py', 'runserver'], {stdio: 'inherit'});
function runServer(cb) {
var cmd = spawn('python', ['manage.py', 'runserver'], {stdio: 'inherit'})
cmd.on('close', function(code) {
console.log('runServer exited with code ' + code);
cb(code);
});
});
console.log('runServer exited with code ' + code)
cb(code)
})
}
// Browser sync server for live reload
gulp.task('browserSync', function() {
function initBrowserSync() {
browserSync.init(
[paths.css + "/*.css", paths.js + "*.js", paths.templates + '*.html'], {
proxy: "localhost:8000"
});
});
[
`${paths.css}/*.css`,
`${paths.js}/*.js`,
`${paths.templates}/*.html`
], {
proxy: "localhost:8000"
}
)
}
// Watch
gulp.task('watch', function() {
function watchPaths() {
watch(`${paths.sass}/*.scss`, styles)
watch(`${paths.templates}/**/*.html`).on("change", reload)
watch([`${paths.js}/*.js`, `!${paths.js}/*.min.js`], scripts).on("change", reload)
}
gulp.watch(paths.sass + '/*.scss', ['styles']);
gulp.watch(paths.js + '/*.js', ['scripts']).on("change", reload);
gulp.watch(paths.images + '/*', ['imgCompression']);
gulp.watch(paths.templates + '/**/*.html').on("change", reload);
// Generate all assets
const generateAssets = parallel(
styles,
scripts,
{% if cookiecutter.custom_bootstrap_compilation == 'y' %}vendorScripts,{% endif %}
imgCompression
)
});
// Set up dev environment
const dev = parallel(
runServer,
initBrowserSync,
watchPaths
)
// Default task
gulp.task('default', function() {
runSequence(['styles', 'scripts', {% if cookiecutter.custom_bootstrap_compilation == 'y' %}'vendor-scripts', {% endif %}'imgCompression'], ['runServer', 'browserSync', 'watch']);
});
exports.default = series(generateAssets, dev)
exports["generate-assets"] = generateAssets
exports["dev"] = dev

View File

@ -6,32 +6,29 @@
{% if cookiecutter.js_task_runner == 'Gulp' -%}
{% if cookiecutter.custom_bootstrap_compilation == 'y' -%}
"bootstrap": "4.1.1",
{% endif -%}
"browser-sync": "^2.14.0",
"del": "^2.2.2",
"gulp": "^3.9.1",
"gulp-autoprefixer": "^5.0.0",
{% if cookiecutter.custom_bootstrap_compilation == 'y' -%}
"gulp-concat": "^2.6.1",
{% endif -%}
"gulp-cssnano": "^2.1.2",
"gulp-imagemin": "^4.1.0",
"gulp-pixrem": "^1.0.0",
"gulp-plumber": "^1.1.0",
"gulp-rename": "^1.2.2",
"gulp-sass": "^3.1.0",
"gulp-uglify": "^3.0.0",
"gulp-util": "^3.0.7",
{% if cookiecutter.custom_bootstrap_compilation == 'y' -%}
"jquery": "3.3.1",
"popper.js": "1.14.3",
{% endif -%}
"run-sequence": "^2.1.1"
"autoprefixer": "^9.4.7",
"browser-sync": "^2.14.0",
"cssnano": "^4.1.10",
"gulp": "^4.0.0",
"gulp-imagemin": "^5.0.3",
"gulp-plumber": "^1.2.1",
"gulp-postcss": "^8.0.0",
"gulp-rename": "^1.2.2",
"gulp-sass": "^4.0.2",
"gulp-uglify-es": "^1.0.4",
"pixrem": "^5.0.0"
{%- endif %}
},
"engines": {
"node": ">=0.8.0"
"node": ">=8"
},
"browserslist": [
"last 2 versions"
],
"scripts": {
{% if cookiecutter.js_task_runner == 'Gulp' -%}
"dev": "gulp"

View File

@ -1 +1 @@
python-3.6.6
python-3.6.8