- Show verbose message if the CA native import option is set but
the wolfSSL build does not support it.
wolfSSL has to be built with WOLFSSL_SYS_CA_CERTS to import native
CA certificates and that may not be common.
Closes https://github.com/curl/curl/pull/16417
To help applications do the right thing easier, change some enum values
into defines with L suffixes so that they get the corect type (long)
easier when used with curl_easy_setopt(). This also fixes a few of our
own libtests.
To reduce the risk that this change breaks the compile for any existing
users, the previously provided enums are still provided, but the values
to use are not defined by the enums.
This change "magically" fixes a few RTSP test failures we have had on
64-bit platforms because those options were not see using longs
properly.
Closes#16482
Sync cutoff version for `-ftree-vrp` with autotools, which enables it
for gcc 4.3+ (cmake builds enabled it for 5.0+, before this patch).
Cherry-picked from #16476Closes#16478
To save configuration time.
After this patch, for mingw-w64 and MSVC curl's CMake builds pre-fill
almost all type sizes without auto-detection. In most cases this leaves
3 type size auto-detections. Those depend on 64/32-bitness, and `time_t`
also depends on CRT and custom options. Old mingw-w64 versions require
some extra detections. We recommend v3.0 or newer to avoid them.
For Windows CE, this patch pre-fills all type sizes.
If this is causing any issue, please report it and disable pre-filling
with `-D_CURL_PREFILL=OFF` in the meantime.
Cherry-picked from #16394Closes#16464
This PR updates the CMake build/install docs in `docs/INSTALL-CMAKE.md`,
in particular focusing on the use of libcurl from CMake using
`find_package` as well as the newly added features/protocols support via
using `COMPONENTS` or `OPTIONAL_COMPONENTS` with `find_package`.
See #15854 for initial discussion and the corresponding PR #15858 that
was merged.
Some additional best-practices notes are added, for example:
* Encouraging building out-of-source
* Using `--config` with `cmake --build` for multi-config CMake
generators, not `CMAKE_BUILD_TYPE`
We also add a CURL CMake-specific tip on using `CMAKE_INSTALL_PREFIX`
during configure time to set the install prefix, not using `--prefix`
when running `cmake --install` so `curl-config` output is consistent.
Closes#16329
This allows you to use the `certs` and `num_certs` writeout variables in
the curl tool, and getting information about the server certificates
using CURLINFO_CERTINFO.
Closes#16459
Drop the `getpart` test tool from standard builds. This tool was not
used by tests.
Also:
- make it easier to build it standalone for testing `getpart.c` on
the command-line.
- reduce local var scopes in source.
Closes#16460
- appveyor: restore VS2008 job, after fixing its issues.
Enable OpenSSL in it. It takes 1 minute.
Follow-up to 9b0467b169#16453
Follow-up to edfa537100#16456
- appveyor: make a copy of OpenSSL DLLs to have them picked up as an
artifact (disabled by default) to aid local tests.
- appveyor: dump CMake configuration logs on failure.
- appveyor: tidy up job parameter defaults.
- GHA/windows: add pre-fill check option for dl-mingw jobs.
- GHA/windows: fix pre-fill check option for MSYS jobs by installing
`diffutils`.
Follow-up to e7adf3e837#15841
- GHA/windows: de-duplicate to `PATH` commands for Cygwin.
- GHA/windows: drop `$SYSTEMROOT/System32` from `PATH` for Cygwin
configure. It's not needed.
Follow-up to 36fd2dd6ee#13599
- list `.pdb` files in curl version step for MSVC.
Ref: #16439
Cherry-picked from #16394Closes#16458
Static CRT crashes MSVCR* MSVC builds (in VS2008, VS2010, VS2012,
VS2013) according to CI and local tests. The reproducible crash happens
in `curl_mfprintf() -> fputc(s, stderr)` when trying to display the
warning message in `curl -V`. `stderr` is non-NULL and resolves to `2`.
This reproducer needs a debug-enabled build, but it's unrelated to debug
features or curl's memory tracker. It happens regardless of unity build,
CPU architecture or `DllMain()` use. Example from VS2013:
```
+ _bld/src/Debug/curl.exe --disable --version
./appveyor.sh: line 124: 203 Segmentation fault "${curl}" --disable --version
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/51570451/job/ojpdqrsm1hmpmq6a#L210
Another crash happened in an UCRT build (VS2017) with a couple of
`printf()`s added to curl's `main()` function:
```
Microsoft Visual C++ Runtime Library
Debug Assertion Failed!
Program: C:/projects/curl/bld/src/Debug/curl.exe
File: minkernel/crts/ucrt/src/appcrt/heap/debug_heap.cpp
Line: 996
Expression: _act_first_block == header
```
(it hangs the job in CI due to the GUI popup)
Ref: https://github.com/curl/curl/pull/16394#issuecomment-2677181716
To avoid actual and potential issues, this patch issues a warning on
the shared-libcurl + static-CRT combination and falls back to the
default, shared CRT. IOW a static CRT build now requires a static curl
exe when using the `CURL_STATIC_CRT=ON` option.
Follow-up to 4fc6ebe18a#1621
Cherry-picked from #16394 (with more details there)
Closes#16456
curl requires Windows XP since 2023. Drop version detection code using
`GetVersionEx()` aimed to support earlier Windows versions. With that
call deleted, the embedded manifest in `curl.rc` becomes unnecessary.
Delete it too, along with the enabler logic in build systems.
This allows to stop forcing `/MANIFEST:NO` for MSVC builds. Dropping it
fixes VS2008 shared builds, that require an auto-generated SxS
(side-by-side assembly) manifest to find their CRT DLLs. This was the
issue that prevented VS2008 `curl.exe` launching on AppVeyor CI:
```
src/curl.exe: error while loading shared libraries: ?: cannot open shared object file: No such file or directory
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/51577006/job/eitypvwlb1rxr11d#L261
FWIW the `curl.rc` embedded manifest wasn't ever enabled for VS2008 CI
builds either, because CMake did not pass our custom macro via
`CMAKE_RC_FLAGS` to `rc.exe`. For reasons I could not figure out.
After this patch the curl build no longer inject its own manifest, and
lets the default be applied by linkers and toolchains. It fixes VS2008
shared builds. curl continues to detect the real Windows version via
`RtlVerifyVersionInfo()` from `ntdll`.
Follow-up to 960d601481#12225
Follow-up to 5044909ca2#7810
Follow-up to ebd213270a#1221
Ref: #15972
Cherry-picked from #16394Closes#16453
Support multi-target cmake builds via `CURL_DIRSUFFIX` env. For example:
`export CURL_DIRSUFFIX=Debug/`.
Multi-target generators place their output to `src/<subdir>/`,
`lib/<subdir>/`, `tests/server/<subdir>`, `tests/libtest/<subdir>` and
`tests/unit/<subdir>/` by default. Before this patch, `runtests.pl`
couldn't run on such builds because it expected the binaries under the
their `<subdir>`-less directories. This patch allows to set such subdir
and make `runtests.pl` find the binaries. In CI we use multi-target
builds with tests for MSVC. It also helps Xcode-generator builds, though
in CI we don't have such job running tests.
There may be better solutions to configure this, but passing a custom
value to `runtests.pl` including its subprocesses is somewhat tricky.
The reason the configuration value expects the slash at the end is
because MSYS is automagically expanding the env to a (wrong) absolute
path if the slash is in the front.
Also:
- drop the `-DCMAKE_RUNTIME_OUTPUT_DIRECTORY_*=` workaround from CI.
- replace `resolve` references in tests with a new `%RESOLVE` variable.
It didn't use a filename extension before. After this patch it uses
`exe_ext('TOOL')`. I'm not sure if this is the correct choice vs.
`exe_ext('SRV')`.
- fix `-c` option format in manual.
- fix some whitespace.
Note, in CI we still tweak `CMAKE_RUNTIME_OUTPUT_DIRECTORY_*` in jobs
which share steps between `./configure` and cmake. It's easier that way.
Ref: #15000
Cherry-picked from #16394Closes#16452
Now using 'sort' for sorting the names. This has the small side-effect
that it sorts slightly different than the previously used sort function
(emacs).
I think this is a better sort and over all it makes it more convenient
to use the script as it removes a manual step.
Closes#16448
Enable TLS Early Data for wolfSSL:
- merge WOLFSSL_CTX and WOLFSSL setup from ngtcp2 with the general
implemenation in wolfssl.c
- enable for QUIC via ngtcp2
- give Curl_vquic_tls_init() a `struct alpn_spec` like used for the TCP
case. Adapt gnutls and other users.
- enable pytest test cases for early data with wolfSSL
and while this messes up wolfssl.c anyway, do
- rename all struct/functions with prefix 'wolfssl_' to 'wssl_' to not
pollute that name prefix
- rename `ctx/handle` to `ssl_ctx/ssl`, as used in openssl case
Closes#16167
This now insists on using a server auth option unless --insecure is
provided. As an added bonus, it now also only checks for the knownhosts
file once (if found).
Ref: #16197Closes#16205
- make it only accept version 1.0, as that is the version curl supports
- convert the parser to use strparse
- the status code max is now 999, but it does allow != 3 digits
Closes#16435
Rework the event based handling of transfers and connections to
be "localized" into a single source file with clearer dependencies.
- add multi_ev.c and multi_ev.h
- add docs/internal/MULTI-EV.md to explain the overall workings
- only do event handling book keeping when the socket callback
is set
- add handling for "connection only" event tracking, when internal
easy handles are used that are not really tied to a connection.
Used in connection pool.
- remove transfer member "last_poll" and connections "shutdown_poll"
and keep all that internal to multi_ev.c
- add CURL_TRC_M() for tracing of "multi" related things, including
event handling and connection pool operations. Add new trace
feature "multi" for trace config.
multi traces will show exactly what is going on in regard to
event handling.
- multi: trace transfers "mstate" in every CURL_TRC_M() call
- make internal trace buffer 2048 bytes and end the silliness
with +n here -m there. Adjust test 1652 expectations of resulting
length and input edge cases.
- add trace feature "lib-ids" to perfix libcurl traces with transfer
and connection ids. Useful for debugging libcurl applications.
Closes#16308
Verified in test 455 and 487.
If the provided string cannot be base64-decoded, it will instead use
"[64dec-fail]" (without the quotes).
Documented
Ref: #16288Closes#16330
When running curl event based, connect attempts stalled as the 'done'
check was using the wrong state in gnutls.
Add event based pytest runs to all http3 jobs and the openssl and
mbedtls ones on linux.
Closes#16423
It has the same name as the one used in asyn-thread, but for a slightly
different purpose. This not only caused unity build problems, but would
also be confusing and error-prone.
