Throttling

HTTP/1.1 420 Enhance Your Calm

Twitter API rate limiting response

Throttling is similar to permissions, in that it determines if a request should be authorized. Throttles indicate a temporary state, and are used to control the rate of requests that clients can make to an API.

As with permissions, multiple throttles may be used. Your API might have a restrictive throttle for unauthenticated requests, and a less restrictive throttle for authenticated requests.

Another scenario where you might want to use multiple throttles would be if you need to impose different constraints on different parts of the API, due to some services being particularly resource-intensive.

Multiple throttles can also be used if you want to impose both burst throttling rates, and sustained throttling rates. For example, you might want to limit a user to a maximum of 60 requests per minute, and 1000 requests per day.

Throttles do not necessarily only refer to rate-limiting requests. For example a storage service might also need to throttle against bandwidth, and a paid data service might want to throttle against a certain number of a records being accessed.

How throttling is determined

As with permissions and authentication, throttling in REST framework is always defined as a list of classes.

Before running the main body of the view each throttle in the list is checked. If any throttle check fails an exceptions.Throttled exception will be raised, and the main body of the view will not run.

Setting the throttling policy

The default throttling policy may be set globally, using the DEFAULT_THROTTLE_CLASSES and DEFAULT_THROTTLE_RATES settings. For example.

REST_FRAMEWORK = {
    'DEFAULT_THROTTLE_CLASSES': (
        'rest_framework.throttles.AnonThrottle',
        'rest_framework.throttles.UserThrottle',
    )
    'DEFAULT_THROTTLE_RATES': {
        'anon': '100/day',
        'user': '1000/day'
    }        
}

The rate descriptions used in DEFAULT_THROTTLE_RATES may include second, minute, hour or day as the throttle period.

You can also set the throttling policy on a per-view basis, using the APIView class based views.

class ExampleView(APIView):
    throttle_classes = (UserThrottle,)

    def get(self, request, format=None):
        content = {
            'status': 'request was permitted'
        }
        return Response(content)

Or, if you're using the @api_view decorator with function based views.

@api_view('GET')
@throttle_classes(UserThrottle)
def example_view(request, format=None):
    content = {
        'status': 'request was permitted'
    }
    return Response(content)

API Reference

AnonRateThrottle

The AnonThrottle will only ever throttle unauthenticated users. The IP address of the incoming request is used to generate a unique key to throttle against.

The allowed request rate is determined from one of the following (in order of preference).

The rate property on the class, which may be provided by overriding AnonThrottle and setting the property.
The DEFAULT_THROTTLE_RATES['anon'] setting.

AnonThrottle is suitable if you want to restrict the rate of requests from unknown sources.

UserRateThrottle

The UserThrottle will throttle users to a given rate of requests across the API. The user id is used to generate a unique key to throttle against. Unauthenticted requests will fall back to using the IP address of the incoming request to generate a unique key to throttle against.

The allowed request rate is determined from one of the following (in order of preference).

The rate property on the class, which may be provided by overriding UserThrottle and setting the property.
The DEFAULT_THROTTLE_RATES['user'] setting.

An API may have multiple UserRateThrottles in place at the same time. To do so, override UserRateThrottle and set a unique "scope" for each class.

For example, multiple user throttle rates could be implemented by using the following classes...

class BurstRateThrottle(UserRateThrottle):
    scope = 'burst'

class SustainedRateThrottle(UserRateThrottle):
    scope = 'sustained'

...and the following settings.

REST_FRAMEWORK = {
    'DEFAULT_THROTTLE_CLASSES': (
        'example.throttles.BurstRateThrottle',
        'example.throttles.SustainedRateThrottle',
    )
    'DEFAULT_THROTTLE_RATES': {
        'burst': '60/min',
        'sustained': '1000/day'
    }
}

UserThrottle is suitable if you want simple global rate restrictions per-user.

ScopedRateThrottle

The ScopedThrottle class can be used to restrict access to specific parts of the API. This throttle will only be applied if the view that is being accessed includes a .throttle_scope property. The unique throttle key will then be formed by concatenating the "scope" of the request with the unqiue user id or IP address.

The allowed request rate is determined by the DEFAULT_THROTTLE_RATES setting using a key from the request "scope".

For example, given the following views...

class ContactListView(APIView):
    throttle_scope = 'contacts'
    ...

class ContactDetailView(ApiView):
    throttle_scope = 'contacts'
    ...

class UploadView(APIView):        
    throttle_scope = 'uploads'
    ...

...and the following settings.

REST_FRAMEWORK = {
    'DEFAULT_THROTTLE_CLASSES': (
        'rest_framework.throttles.ScopedRateThrottle',
    )
    'DEFAULT_THROTTLE_RATES': {
        'contacts': '1000/day',
        'uploads': '20/day'
    }
}

User requests to either ContactListView or ContactDetailView would be restricted to a total of 1000 requests per-day. User requests to UploadView would be restricted to 20 requests per day.

Custom throttles

To create a custom throttle, override BaseThrottle and implement .allow_request(request, view). The method should return True if the request should be allowed, and False otherwise.

Optionally you may also override the .wait() method. If implemented, .wait() should return a recomended number of seconds to wait before attempting the next request, or None. The .wait() method will only be called if .allow_request() has previously returned False.