* Add `training.before_update` callback
This callback can be used to implement training paradigms like gradual (un)freezing of components (e.g: the Transformer) after a certain number of training steps to mitigate catastrophic forgetting during fine-tuning.
* Fix type annotation, default config value
* Generalize arguments passed to the callback
* Update schema
* Pass `epoch` to callback, rename `current_step` to `step`
* Add test
* Simplify test
* Replace config string with `spacy.blank`
* Apply suggestions from code review
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Cleanup imports
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Check textcat values for validity
* Fix error numbers
* Clean up vals reference
* Check category value validity through training
The _validate_categories is called in update, which for multilabel is
inherited from the single label component.
* Formatting
* Add equality definition for vectors
This re-uses the check from sourcing components.
* Use the equality check
* Format
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Fix typos, add couple of new abbreviations, remove nonbreaking spaces
* Remove space from abbreviation
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update warning, add tests for project requirements check
* Make warning more general for differences between PEP 508 and pip
* Add tests for _check_requirements
* Parameterize test
* Add fallback in requirements check, only check once
* Rename to skip_requirements_check
* Update spacy/cli/project/run.py
Co-authored-by: Paul O'Leary McCann <polm@dampfkraft.com>
Co-authored-by: Paul O'Leary McCann <polm@dampfkraft.com>
* Fix default parameters for load functions
Some load functions used SimpleFrozenList() directly instead of the
_DEFAULT_EMPTY_PIPES parameter. That mostly worked as intended, but
the changes in #11459 check for equality using identity, not value, so a
warning is incorrectly raised sometimes, as in #11706.
This change just has all the load functions use the singleton value
instead.
* Add test that there are no warnings on module-based load
This will succeed due to changes in this branch, but local tests with
the latest release failed as intended.
* Try reverting commit and see if CI changes
There is an error in CI that is probably unrelated.
Revert "Fix default parameters for load functions"
This reverts commit dc46b35687.
* Revert "Try reverting commit and see if CI changes"
This reverts commit 2514ed07ef.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update textcat scorer threshold behavior
For `textcat` (with exclusive classes) the scorer should always use a
threshold of 0.0 because there should be one predicted label per doc and
the numeric score for that particular label should not matter.
* Rename to test_textcat_multilabel_threshold
* Remove all uses of threshold for multi_label=False
* Update Scorer.score_cats API docs
* Add tests for score_cats with thresholds
* Update textcat API docs
* Fix types
* Convert threshold back to float
* Fix threshold type in docstring
* Improve formatting in Scorer API docs
* Handle docs with no entities
If a whole batch contains no entities it won't make it to the model, but
it's possible for individual Docs to have no entities. Before this
commit, those Docs would cause an error when attempting to concatenate
arrays because the dimensions didn't match.
It turns out the process of preparing the Ragged at the end of the span
maker forward was a little different from list2ragged, which just uses
the flatten function directly. Letting list2ragged do the conversion
avoids the dimension issue.
This did not come up before because in NEL demo projects it's typical
for data with no entities to be discarded before it reaches the NEL
component.
This includes a simple direct test that shows the issue and checks it's
resolved. It doesn't check if there are any downstream changes, so a
more complete test could be added. A full run was tested by adding an
example with no entities to the Emerson sample project.
* Add a blank instance to default training data in tests
Rather than adding a specific test, since not failing on instances with
no entities is basic functionality, it makes sense to add it to the
default set.
* Fix without modifying architecture
If the architecture is modified this would have to be a new version, but
this change isn't big enough to merit that.
* Fix multiple extensions and character offset
* Rename token_start/end to start/end
* Refactor Doc.from_json based on review
* Iterate over user_data items
* Only add non-empty underscore entries
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Fix flag handling in dvc
Prior to this commit, if a flag (--verbose or --quiet) was passed to
DVC, it would be added to the end of the generated dvc command line.
This would result in the command being interpreted as part of the actual
command to run, rather than an argument to dvc. This would result in
command lines like:
spacy project run preprocess --verbose
That would fail with an error that there's no such directory as
`--verbose`.
This change puts the flags at the front of the dvc command so that they
are interpreted correctly. It removes the `run_dvc_commands` function,
which had been reduced to just a for loop and wasn't used elsewhere.
A separate problem is that there's no way to specify the quiet behaviour
to dvc from the command line, though it's unclear if that's a bug.
* Add dvc quiet flag to docs
* Handle case in DVC where no commands are appropriate
If only have commands with no deps or outputs (admittedly unlikely), you
get a weird error about the dvc file not existing. This gives explicit
output instead.
* Add support for quiet flag
* Fix command execution
Commands are strings now because they're joined further up.
* Change enable/disable behavior so that arguments take precedence over config options. Extend error message on conflict. Add warning message in case of overwriting config option with arguments.
* Fix tests in test_serialize_pipeline.py to reflect changes to handling of enable/disable.
* Fix type issue.
* Move comment.
* Move comment.
* Issue UserWarning instead of printing wasabi message. Adjust test.
* Added pytest.warns(UserWarning) for expected warning to fix tests.
* Update warning message.
* Move type handling out of fetch_pipes_status().
* Add global variable for default value. Use id() to determine whether used values are default value.
* Fix default value for disable.
* Rename DEFAULT_PIPE_STATUS to _DEFAULT_EMPTY_PIPES.
* add punctuation to grc
Add support for special editorial punctuation that is common in ancient Greek texts. Ancient Greek texts, as found in digital and print form, have been largely edited by scholars. Restorations and improvements are normally marked with special characters that need to be handled properly by the tokenizer.
* add unit tests
* simplify regex
* move generic quotes to char classes
* rename unit test
* fix regex
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: svlandeg <svlandeg@github.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Preserve both `-` and `O` annotation in augmenters rather than relying
on `Example.to_dict`'s default support for one option outside of labeled
entity spans.
This is intended as a temporary workaround for augmenters for v3.4.x.
The behavior of `Example` and related IOB utils could be improved in the
general case for v3.5.
* Remove side effects from Doc.__init__()
* Changes based on review comment
* Readd test
* Change interface of Doc.__init__()
* Simplify test
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update doc.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* replicate bug with tok2vec in annotating components
* add overfitting test with a frozen tok2vec
* remove broadcast from predict and check doc.tensor instead
* remove broadcast
* proper error
* slight rephrase of documentation
* Enable Cython<->Python bindings for `Pipe` and `TrainablePipe` methods
* `pipes_with_nvtx_range`: Skip hooking methods whose signature cannot be ascertained
When loading pipelines from a config file, the arguments passed to individual pipeline components is validated by `pydantic` during init. For this, the validation model attempts to parse the function signature of the component's c'tor/entry point so that it can check if all mandatory parameters are present in the config file.
When using the `models_and_pipes_with_nvtx_range` as a `after_pipeline_creation` callback, the methods of all pipeline components get replaced by a NVTX range wrapper **before** the above-mentioned validation takes place. This can be problematic for components that are implemented as Cython extension types - if the extension type is not compiled with Python bindings for its methods, they will have no signatures at runtime. This resulted in `pydantic` matching the *wrapper's* parameters with the those in the config and raising errors.
To avoid this, we now skip applying the wrapper to any (Cython) methods that do not have signatures.
* new error message when 'project run assets'
* new error message when 'project run assets'
* Update spacy/cli/project/run.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
