* add additional REL_OP
* change to condition and new rel_op symbols
* add operators to docs
* add the anchor while we're in here
* add tests
Co-authored-by: Peter Baumgartner <5107405+pmbaumgartner@users.noreply.github.com>
* Min_max_operators
1. Modified API and Usage for spaCy website to include min_max operator
2. Modified matcher.pyx to include min_max function {n,m} and its variants
3. Modified schemas.py to include min_max validation error
4. Added test cases to test_matcher_api.py, test_matcher_logic.py and test_pattern_validation.py
* attempt to fix mypy/pydantic compat issue
* formatting
* Update spacy/tests/matcher/test_pattern_validation.py
Co-authored-by: Source-Shen <82353723+Source-Shen@users.noreply.github.com>
Co-authored-by: svlandeg <svlandeg@github.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Enable flag on spacy.load: foundation for include, enable arguments.
* Enable flag on spacy.load: fixed tests.
* Enable flag on spacy.load: switched from pretrained model to empty model with added pipes for tests.
* Enable flag on spacy.load: switched to more consistent error on misspecification of component activity. Test refactoring. Added to default config.
* Enable flag on spacy.load: added support for fields not in pipeline.
* Enable flag on spacy.load: removed serialization fields from supported fields.
* Enable flag on spacy.load: removed 'enable' from config again.
* Enable flag on spacy.load: relaxed checks in _resolve_component_activation_status() to allow non-standard pipes.
* Enable flag on spacy.load: fixed relaxed checks for _resolve_component_activation_status() to allow non-standard pipes. Extended tests.
* Enable flag on spacy.load: comments w.r.t. resolution workarounds.
* Enable flag on spacy.load: remove include fields. Update website docs.
* Enable flag on spacy.load: updates w.r.t. changes in master.
* Implement Doc.from_json(): update docstrings.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Implement Doc.from_json(): remove newline.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Implement Doc.from_json(): change error message for E1038.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Enable flag on spacy.load: wrapped docstring for _resolve_component_status() at 80 chars.
* Enable flag on spacy.load: changed exmples for enable flag.
* Remove newline.
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix docstring for Language._resolve_component_status().
* Rename E1038 to E1042.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Add SpanRuler component
Add a `SpanRuler` component similar to `EntityRuler` that saves a list
of matched spans to `Doc.spans[spans_key]`. The matches from the token
and phrase matchers are deduplicated and sorted before assignment but
are not otherwise filtered.
* Update spacy/pipeline/span_ruler.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix cast
* Add self.key property
* Use number of patterns as length
* Remove patterns kwarg from init
* Update spacy/tests/pipeline/test_span_ruler.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Add options for spans filter and setting to ents
* Add `spans_filter` option as a registered function'
* Make `spans_key` optional and if `None`, set to `doc.ents` instead of
`doc.spans[spans_key]`.
* Update and generalize tests
* Add test for setting doc.ents, fix key property type
* Fix typing
* Allow independent doc.spans and doc.ents
* If `spans_key` is set, set `doc.spans` with `spans_filter`.
* If `annotate_ents` is set, set `doc.ents` with `ents_fitler`.
* Use `util.filter_spans` by default as `ents_filter`.
* Use a custom warning if the filter does not work for `doc.ents`.
* Enable use of SpanC.id in Span
* Support id in SpanRuler as Span.id
* Update types
* `id` can only be provided as string (already by `PatternType`
definition)
* Update all uses of Span.id/ent_id in Doc
* Rename Span id kwarg to span_id
* Update types and docs
* Add ents filter to mimic EntityRuler overwrite_ents
* Refactor `ents_filter` to take `entities, spans` args for more
filtering options
* Give registered filters more descriptive names
* Allow registered `filter_spans` filter
(`spacy.first_longest_spans_filter.v1`) to take any number of
`Iterable[Span]` objects as args so it can be used for spans filter
or ents filter
* Implement future entity ruler as span ruler
Implement a compatible `entity_ruler` as `future_entity_ruler` using
`SpanRuler` as the underlying component:
* Add `sort_key` and `sort_reverse` to allow the sorting behavior to be
customized. (Necessary for the same sorting/filtering as in
`EntityRuler`.)
* Implement `overwrite_overlapping_ents_filter` and
`preserve_existing_ents_filter` to support
`EntityRuler.overwrite_ents` settings.
* Add `remove_by_id` to support `EntityRuler.remove` functionality.
* Refactor `entity_ruler` tests to parametrize all tests to test both
`entity_ruler` and `future_entity_ruler`
* Implement `SpanRuler.token_patterns` and `SpanRuler.phrase_patterns`
properties.
Additional changes:
* Move all config settings to top-level attributes to avoid duplicating
settings in the config vs. `span_ruler/cfg`. (Also avoids a lot of
casting.)
* Format
* Fix filter make method name
* Refactor to use same error for removing by label or ID
* Also provide existing spans to spans filter
* Support ids property
* Remove token_patterns and phrase_patterns
* Update docstrings
* Add span ruler docs
* Fix types
* Apply suggestions from code review
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Move sorting into filters
* Check for all tokens in seen tokens in entity ruler filters
* Remove registered sort key
* Set Token.ent_id in a backwards-compatible way in Doc.set_ents
* Remove sort options from API docs
* Update docstrings
* Rename entity ruler filters
* Fix and parameterize scoring
* Add id to Span API docs
* Fix typo in API docs
* Include explicit labeled=True for scorer
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update docs for displacy style kwargs
Added "span" to the accepted values for the style kwarg in the displacy.serve and displacy.render top-level functions. These styles are new as of SpaCy 3.3, so I added the "new" tag for that option only
* restored alpha ordering
* Rename to spans_key for consistency
* Implement spans length in debug data
* Implement how span bounds and spans are obtained
In this commit, I implemented how span boundaries (the tokens) around a
given span and spans are obtained. I've put them in the compile_gold()
function so that it's accessible later on. I will do the actual
computation of the span and boundary distinctiveness in the main
function above.
* Compute for p_spans and p_bounds
* Add computation for SD and BD
* Fix mypy issues
* Add weighted average computation
* Fix compile_gold conditional logic
* Add test for frequency distribution computation
* Add tests for kl-divergence computation
* Fix weighted average computation
* Make tables more compact by rounding them
* Add more descriptive checks for spans
* Modularize span computation methods
In this commit, I added the _get_span_characteristics and
_print_span_characteristics functions so that they can be reusable
anywhere.
* Remove unnecessary arguments and make fxs more compact
* Update a few parameter arguments
* Add tests for print_span and get_span methods
* Update API to talk about span characteristics in brief
* Add better reporting of spans_length
* Add test for span length reporting
* Update formatting of span length report
Removed '' to indicate that it's not a string, then
sort the n-grams by their length, not by their frequency.
* Apply suggestions from code review
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Show all frequency distribution when -V
In this commit, I displayed the full frequency distribution of the
span lengths when --verbose is passed. To make things simpler, I
rewrote some of the formatter functions so that I can call them
whenever.
Another notable change is that instead of showing percentages as
Integers, I showed them as floats (max 2-decimal places). I did this
because it looks weird when it displays (0%).
* Update logic on how total is computed
The way the 90% thresholding is computed now is that we keep
adding the percentages until we reach >= 90%. I also updated the wording
and used the term "At least" to denote that >= 90% of your spans have
these distributions.
* Fix display when showing the threshold percentage
* Apply suggestions from code review
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add better phrasing for span information
* Update spacy/cli/debug_data.py
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add minor edits for whitespaces etc.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Allow assets to be optional in spacy project: draft for optional flag/download_all options.
* Allow assets to be optional in spacy project: added OPTIONAL_DEFAULT reflecting default asset optionality.
* Allow assets to be optional in spacy project: renamed --all to --extra.
* Allow assets to be optional in spacy project: included optional flag in project config test.
* Allow assets to be optional in spacy project: added documentation.
* Allow assets to be optional in spacy project: fixing deprecated --all reference.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Allow assets to be optional in spacy project: fixed project_assets() docstring.
* Allow assets to be optional in spacy project: adjusted wording in justification of optional assets.
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow assets to be optional in spacy project: switched to as keyword in project.yml. Updated docs.
* Allow assets to be optional in spacy project: updated comment.
* Allow assets to be optional in spacy project: replacing 'optional' with 'extra' in output.
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow assets to be optional in spacy project: replacing 'optional' with 'extra' in docstring..
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow assets to be optional in spacy project: replacing 'optional' with 'extra' in test..
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow assets to be optional in spacy project: replacing 'optional' with 'extra' in test.
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow assets to be optional in spacy project: renamed OPTIONAL_DEFAULT to EXTRA_DEFAULT.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* add v1 and v2 tests for tok2vec architectures
* textcat architectures are not "layers"
* test older textcat architectures
* test older parser architecture
* Document different ways to create a pipeline: moved up/slightly modified paragraph on pipeline creation.
* Document different ways to create a pipeline: changed Finnish to Ukrainian in example for language without trained pipeline.
* Document different ways to create a pipeline: added explanation of blank pipeline.
* Document different ways to create a pipeline: exchanged Ukrainian with Yoruba.
* Add initial design for diff command
For now, the diffing process looks like this:
- The default config is created based from some values in the user
config (e.g. which pipeline components were used, the lang, etc.)
- The user must supply manually if it was optimized for acc/efficiency
and if pretraining was involved.
* Make diff command structure similar to siblings
* Include gpu as a user option for CLI
* Make variables more explicit
* Fix type declaration for optimize enum
* Improve docstrings for diff CLI
* Add debug-diff to website API docs
* Switch position of configs so that user config is modded
* Add markdown flag for debug diff
This commit adds a --markdown (--md) flag that allows easier
copy-pasting to Github issues. Please note that this commit is dependent
on an unreleased version of wasabi (for the time being).
For posterity, the related PR is found here: https://github.com/ines/wasabi/pull/20
* Bump version of wasabi to 0.9.1
So that we can use the add_symbols parameter.
* Apply suggestions from code review
Co-authored-by: Ines Montani <ines@ines.io>
* Update docs based on code review suggestions
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Change command name from diff -> diff-config
* Clarify when options are relevant or not
* Rerun prettier on cli.md
Co-authored-by: Ines Montani <ines@ines.io>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Added new convenience cython functions to SpanGroup to avoid unnecessary allocation/deallocation of objects
* Replaced sorting in has_overlap with C++ for efficiency. Also, added a test for has_overlap
* Added a method to efficiently merge SpanGroups
* Added __delitem__, __add__ and __iadd__. Also, allowed to pass span lists to merge function. Replaced extend() body with call to merge
* Renamed merge to concat and added missing things to documentation
* Added operator+ and operator += in the documentation
* Added a test for Doc deallocation
* Update spacy/tokens/span_group.pyx
* Updated SpanGroup tests to use new span list comparison function rather than assert_span_list_equal, eliminating the need to have a separate assert_not_equal fnction
* Fixed typos in SpanGroup documentation
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Minor changes requested by Sofie: rearranged import statements. Added new=3.2.1 tag to SpanGroup.__setitem__ documentation
* SpanGroup: moved repetitive list index check/adjustment in a separate function
* Turn off formatting that hurts readability spacy/tests/doc/test_span_group.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Remove formatting that hurts readability spacy/tests/doc/test_span_group.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Turn off formatting that hurts readability in spacy/tests/doc/test_span_group.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Support more internal methods for SpanGroup
Add support for:
* `__setitem__`
* `__delitem__`
* `__iadd__`: for `SpanGroup` or `Iterable[Span]`
* `__add__`: for `SpanGroup` only
Adapted from #9698 with the scope limited to the magic methods.
* Use v3.3 as new version in docs
* Add new tag to SpanGroup.copy in API docs
* Remove duplicate import
* Apply suggestions from code review
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Remaining suggestions and formatting
Co-authored-by: nrodnova <nrodnova@hotmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Natalia Rodnova <4512370+nrodnova@users.noreply.github.com>
* Add vector deduplication
* Add `Vocab.deduplicate_vectors()`
* Always run deduplication in `spacy init vectors`
* Clean up a few vector-related error messages and docs examples
* Always unique with numpy
* Fix types
* Add edit tree lemmatizer
Co-authored-by: Daniël de Kok <me@danieldk.eu>
* Hide edit tree lemmatizer labels
* Use relative imports
* Switch to single quotes in error message
* Type annotation fixes
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Reformat edit_tree_lemmatizer with black
* EditTreeLemmatizer.predict: take Iterable
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Validate edit trees during deserialization
This change also changes the serialized representation. Rather than
mirroring the deep C structure, we use a simple flat union of the match
and substitution node types.
* Move edit_trees to _edit_tree_internals
* Fix invalid edit tree format error message
* edit_tree_lemmatizer: remove outdated TODO comment
* Rename factory name to trainable_lemmatizer
* Ignore type instead of casting truths to List[Union[Ints1d, Floats2d, List[int], List[str]]] for thinc v8.0.14
* Switch to Tagger.v2
* Add documentation for EditTreeLemmatizer
* docs: Fix 3.2 -> 3.3 somewhere
* trainable_lemmatizer documentation fixes
* docs: EditTreeLemmatizer is in edit_tree_lemmatizer.py
Co-authored-by: Daniël de Kok <me@danieldk.eu>
Co-authored-by: Daniël de Kok <me@github.danieldk.eu>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Add tokenizer option to allow Matcher handling for all rules
Add tokenizer option `with_faster_rules_heuristics` that determines
whether the special cases applied by the internal `Matcher` are filtered
by whether they contain affixes or space. If `True` (default), the rules
are filtered to prioritize speed over rare edge cases. If `False`, all
rules are included in the final `Matcher`-based pass over the doc.
* Reset all caches when reloading special cases
* Revert "Reset all caches when reloading special cases"
This reverts commit 4ef6bd171d.
* Initialize max_length properly
* Add new tag to API docs
* Rename to faster heuristics
* Fix docstring for EntityRenderer
* Add warning in displacy if doc.spans are empty
* Implement parse_spans converter
One notable change here is that the default spans_key is sc, and
it's set by the user through the options.
* Implement SpanRenderer
Here, I implemented a SpanRenderer that looks similar to the
EntityRenderer except for some templates. The spans_key, by default, is
set to sc, but can be configured in the options (see parse_spans). The
way I rendered these spans is per-token, i.e., I first check if each
token (1) belongs to a given span type and (2) a starting token of a
given span type. Once I have this information, I render them into the
markup.
* Fix mypy issues on typing
* Add tests for displacy spans support
* Update colors from RGB to hex
Co-authored-by: Ines Montani <ines@ines.io>
* Remove unnecessary CSS properties
* Add documentation for website
* Remove unnecesasry scripts
* Update wording on the documentation
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Put typing dependency on top of file
* Put back z-index so that spans overlap properly
* Make warning more explicit for spans_key
Co-authored-by: Ines Montani <ines@ines.io>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Tagger: use unnormalized probabilities for inference
Using unnormalized softmax avoids use of the relatively expensive exp function,
which can significantly speed up non-transformer models (e.g. I got a speedup
of 27% on a German tagging + parsing pipeline).
* Add spacy.Tagger.v2 with configurable normalization
Normalization of probabilities is disabled by default to improve
performance.
* Update documentation, models, and tests to spacy.Tagger.v2
* Move Tagger.v1 to spacy-legacy
* docs/architectures: run prettier
* Unnormalized softmax is now a Softmax_v2 option
* Require thinc 8.0.14 and spacy-legacy 3.0.9
* Add save_candidates attribute
* Change spancat api
* Add unit test
* reimplement method to produce a list of doc
* Add method to docs
* Add new version tag
* Add intended use to docstring
* prettier formatting
* Partial fix of entity linker batching
* Add import
* Better name
* Add `use_gold_ents` option, docs
* Change to v2, create stub v1, update docs etc.
* Fix error type
Honestly no idea what the right type to use here is.
ConfigValidationError seems wrong. Maybe a NotImplementedError?
* Make mypy happy
* Add hacky fix for init issue
* Add legacy pipeline entity linker
* Fix references to class name
* Add __init__.py for legacy
* Attempted fix for loss issue
* Remove placeholder V1
* formatting
* slightly more interesting train data
* Handle batches with no usable examples
This adds a test for batches that have docs but not entities, and a
check in the component that detects such cases and skips the update step
as thought the batch were empty.
* Remove todo about data verification
Check for empty data was moved further up so this should be OK now - the
case in question shouldn't be possible.
* Fix gradient calculation
The model doesn't know which entities are not in the kb, so it generates
embeddings for the context of all of them.
However, the loss does know which entities aren't in the kb, and it
ignores them, as there's no sensible gradient.
This has the issue that the gradient will not be calculated for some of
the input embeddings, which causes a dimension mismatch in backprop.
That should have caused a clear error, but with numpyops it was causing
nans to happen, which is another problem that should be addressed
separately.
This commit changes the loss to give a zero gradient for entities not in
the kb.
* add failing test for v1 EL legacy architecture
* Add nasty but simple working check for legacy arch
* Clarify why init hack works the way it does
* Clarify use_gold_ents use case
* Fix use gold ents related handling
* Add tests for no gold ents and fix other tests
* Use aligned ents function (not working)
This doesn't actually work because the "aligned" ents are gold-only. But
if I have a different function that returns the intersection, *then*
this will work as desired.
* Use proper matching ent check
This changes the process when gold ents are not used so that the
intersection of ents in the pred and gold is used.
* Move get_matching_ents to Example
* Use model attribute to check for legacy arch
* Rename flag
* bump spacy-legacy to lower 3.0.9
Co-authored-by: svlandeg <svlandeg@github.com>
* remove duplicate line
* add sent start/end token attributes to the docs
* let has_annotation work with IS_SENT_END
* elif instead of if
* add has_annotation test for sent attributes
* fix typo
* remove duplicate is_sent_start entry in docs
* Clarify Span.ents documentation
Ref: #10135
Retain current behaviour. Span.ents will only include entities within
said span. You can't get tokens outside of the original span.
* Reword docstrings
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update API docs in the website
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Fix infix as prefix in Tokenizer.explain
Update `Tokenizer.explain` to align with the `Tokenizer` algorithm:
* skip infix matches that are prefixes in the current substring
* Update tokenizer pseudocode in docs
* added new field
* added exception for IOb strings
* minor refinement to schema
* removed field
* fixed typo
* imported numeriacla val
* changed the code bit
* cosmetics
* added test for matcher
* set ents of moc docs
* added invalid pattern
* minor update to documentation
* blacked matcher
* added pattern validation
* add IOB vals to schema
* changed into test
* mypy compat
* cleaned left over
* added compat import
* changed type
* added compat import
* changed literal a bit
* went back to old
* made explicit type
* Update spacy/schemas.py
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update spacy/schemas.py
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update spacy/schemas.py
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add link to pattern file info in EntityRuler.initialize docs
* Update website/docs/api/entityruler.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Use Vectors.shape rather than Vectors.data.shape
* Use Vectors.size rather than Vectors.data.size
* Add Vectors.to_ops to move data between different ops
* Add documentation for Vector.to_ops
* Fix Scorer.score_cats for missing labels
* Add test case for Scorer.score_cats missing labels
* semantic nitpick
* black formatting
* adjust test to give different results depending on multi_label setting
* fix loss function according to whether or not missing values are supported
* add note to docs
* small fixes
* make mypy happy
* Update spacy/pipeline/textcat.py
Co-authored-by: Florian Cäsar <florian.caesar@pm.me>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: svlandeg <svlandeg@github.com>
* added ruler coe
* added error for none existing pattern
* changed error to warning
* changed error to warning
* added basic tests
* fixed place
* added test files
* went back to error
* went back to pattern error
* minor change to docs
* changed style
* changed doc
* changed error slightly
* added remove to phrasem api
* error key already existed
* phrase matcher match code to api
* blacked tests
* moved comments before expr
* corrected error no
* Update website/docs/api/entityruler.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update website/docs/api/entityruler.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Added sents property to Span class that returns a generator of sentences the Span belongs to
* Added description to Span.sents property
* Update test_span to clarify the difference between span.sent and span.sents
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update spacy/tests/doc/test_span.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix documentation typos in spacy/tokens/span.pyx
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update Span.sents doc string in spacy/tokens/span.pyx
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Parametrized test_span_spans
* Corrected Span.sents to check for span-level hook first. Also, made Span.sent respect doc-level sents hook if no span-level hook is provided
* Corrected Span ocumentation copy/paste issue
* Put back accidentally deleted lines
* Fixed formatting in span.pyx
* Moved check for SENT_START annotation after user hooks in Span.sents
* add version where the property was introduced
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Add support for kb_id to be displayed via displacy.serve. The current support is only limited to the manual option in displacy.render
* Commit to check pre-commit hooks are run.
* Update spacy/displacy/__init__.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Changes as per suggestions on the PR.
* Update website/docs/api/top-level.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update website/docs/api/top-level.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* tag option as new from 3.2.1 onwards
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: svlandeg <sofie.vanlandeghem@gmail.com>
* Added ENT_ID and ENT_KB_ID into the list of the attributes that Matcher matches on
* Added ENT_ID and ENT_KB_ID to TEST_PATTERNS in test_pattern_validation.py. Disabled tests that I added before
* Update website/docs/api/matcher.md
* Format
* Remove skipped tests
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add note on batch contract
Using listeners requires batches to be consistent. This is obvious if
you understand how the listener works, but it wasn't clearly stated in
the Docs, and was subtle enough that the EntityLinker missed it.
There is probably a clearer way to explain what the actual requirement
is, but I figure this is a good start.
* Rewrite to clarify role of caching
* Clarify how to fill in init_tok2vec after pretraining
* Ignore init_tok2vec arg in pretraining
* Update docs, config setting
* Remove obsolete note about not filling init_tok2vec early
This seems to have also caught some lines that needed cleanup.
* Clarify error when words are of wrong type
See #9437
* Update docs
* Use try/except
* Apply suggestions from code review
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add section for spacy.cli.train.train
* Add link from training page to train function
* Ensure path in train helper
* Update docs
Co-authored-by: Ines Montani <ines@ines.io>
* Add micro PRF for morph scoring
For pipelines where morph features are added by more than one component
and a reference training corpus may not contain all features, a micro
PRF score is more flexible than a simple accuracy score. An example is
the reading and inflection features added by the Japanese tokenizer.
* Use `morph_micro_f` as the default morph score for Japanese
morphologizers.
* Update docstring
* Fix typo in docstring
* Update Scorer API docs
* Fix results type
* Organize score list by attribute prefix
* Add support for fasttext-bloom hash-only vectors
Overview:
* Extend `Vectors` to have two modes: `default` and `ngram`
* `default` is the default mode and equivalent to the current
`Vectors`
* `ngram` supports the hash-only ngram tables from `fasttext-bloom`
* Extend `spacy.StaticVectors.v2` to handle both modes with no changes
for `default` vectors
* Extend `spacy init vectors` to support ngram tables
The `ngram` mode **only** supports vector tables produced by this
fork of fastText, which adds an option to represent all vectors using
only the ngram buckets table and which uses the exact same ngram
generation algorithm and hash function (`MurmurHash3_x64_128`).
`fasttext-bloom` produces an additional `.hashvec` table, which can be
loaded by `spacy init vectors --fasttext-bloom-vectors`.
https://github.com/adrianeboyd/fastText/tree/feature/bloom
Implementation details:
* `Vectors` now includes the `StringStore` as `Vectors.strings` so that
the API can stay consistent for both `default` (which can look up from
`str` or `int`) and `ngram` (which requires `str` to calculate the
ngrams).
* In ngram mode `Vectors` uses a default `Vectors` object as a cache
since the ngram vectors lookups are relatively expensive.
* The default cache size is the same size as the provided ngram vector
table.
* Once the cache is full, no more entries are added. The user is
responsible for managing the cache in cases where the initial
documents are not representative of the texts.
* The cache can be resized by setting `Vectors.ngram_cache_size` or
cleared with `vectors._ngram_cache.clear()`.
* The API ends up a bit split between methods for `default` and for
`ngram`, so functions that only make sense for `default` or `ngram`
include warnings with custom messages suggesting alternatives where
possible.
* `Vocab.vectors` becomes a property so that the string stores can be
synced when assigning vectors to a vocab.
* `Vectors` serializes its own config settings as `vectors.cfg`.
* The `Vectors` serialization methods have added support for `exclude`
so that the `Vocab` can exclude the `Vectors` strings while serializing.
Removed:
* The `minn` and `maxn` options and related code from
`Vocab.get_vector`, which does not work in a meaningful way for default
vector tables.
* The unused `GlobalRegistry` in `Vectors`.
* Refactor to use reduce_mean
Refactor to use reduce_mean and remove the ngram vectors cache.
* Rename to floret
* Rename to floret in error messages
* Use --vectors-mode in CLI, vector init
* Fix vectors mode in init
* Remove unused var
* Minor API and docstrings adjustments
* Rename `--vectors-mode` to `--mode` in `init vectors` CLI
* Rename `Vectors.get_floret_vectors` to `Vectors.get_batch` and support
both modes.
* Minor updates to Vectors docstrings.
* Update API docs for Vectors and init vectors CLI
* Update types for StaticVectors
* Add the spacy.models_with_nvtx_range.v1 callback
This callback recursively adds NVTX ranges to the Models in each pipe in
a pipeline.
* Fix create_models_with_nvtx_range type signature
* NVTX range: wrap models of all trainable pipes jointly
This avoids that (sub-)models that are shared between pipes get wrapped
twice.
* NVTX range callback: make color configurable
Add forward_color and backprop_color options to set the color for the
NVTX range.
* Move create_models_with_nvtx_range to spacy.ml
* Update create_models_with_nvtx_range for thinc changes
with_nvtx_range now updates an existing node, rather than returning a
wrapper node. So, we can simply walk over the nodes and update them.
* NVTX: use after_pipeline_creation in example
* Add note about how the model name is used
* Add link to TransformersModel docs, separate paragraph
* Local link
* Revise docs
* Update website/docs/usage/embeddings-transformers.md
* Update website/docs/usage/embeddings-transformers.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* 🚨 Ignore all existing Mypy errors
* 🏗 Add Mypy check to CI
* Add types-mock and types-requests as dev requirements
* Add additional type ignore directives
* Add types packages to dev-only list in reqs test
* Add types-dataclasses for python 3.6
* Add ignore to pretrain
* 🏷 Improve type annotation on `run_command` helper
The `run_command` helper previously declared that it returned an
`Optional[subprocess.CompletedProcess]`, but it isn't actually possible
for the function to return `None`. These changes modify the type
annotation of the `run_command` helper and remove all now-unnecessary
`# type: ignore` directives.
* 🔧 Allow variable type redefinition in limited contexts
These changes modify how Mypy is configured to allow variables to have
their type automatically redefined under certain conditions. The Mypy
documentation contains the following example:
```python
def process(items: List[str]) -> None:
# 'items' has type List[str]
items = [item.split() for item in items]
# 'items' now has type List[List[str]]
...
```
This configuration change is especially helpful in reducing the number
of `# type: ignore` directives needed to handle the common pattern of:
* Accepting a filepath as a string
* Overwriting the variable using `filepath = ensure_path(filepath)`
These changes enable redefinition and remove all `# type: ignore`
directives rendered redundant by this change.
* 🏷 Add type annotation to converters mapping
* 🚨 Fix Mypy error in convert CLI argument verification
* 🏷 Improve type annotation on `resolve_dot_names` helper
* 🏷 Add type annotations for `Vocab` attributes `strings` and `vectors`
* 🏷 Add type annotations for more `Vocab` attributes
* 🏷 Add loose type annotation for gold data compilation
* 🏷 Improve `_format_labels` type annotation
* 🏷 Fix `get_lang_class` type annotation
* 🏷 Loosen return type of `Language.evaluate`
* 🏷 Don't accept `Scorer` in `handle_scores_per_type`
* 🏷 Add `string_to_list` overloads
* 🏷 Fix non-Optional command-line options
* 🙈 Ignore redefinition of `wandb_logger` in `loggers.py`
* ➕ Install `typing_extensions` in Python 3.8+
The `typing_extensions` package states that it should be used when
"writing code that must be compatible with multiple Python versions".
Since SpaCy needs to support multiple Python versions, it should be used
when newer `typing` module members are required. One example of this is
`Literal`, which is available starting with Python 3.8.
Previously SpaCy tried to import `Literal` from `typing`, falling back
to `typing_extensions` if the import failed. However, Mypy doesn't seem
to be able to understand what `Literal` means when the initial import
means. Therefore, these changes modify how `compat` imports `Literal` by
always importing it from `typing_extensions`.
These changes also modify how `typing_extensions` is installed, so that
it is a requirement for all Python versions, including those greater
than or equal to 3.8.
* 🏷 Improve type annotation for `Language.pipe`
These changes add a missing overload variant to the type signature of
`Language.pipe`. Additionally, the type signature is enhanced to allow
type checkers to differentiate between the two overload variants based
on the `as_tuple` parameter.
Fixes#8772
* ➖ Don't install `typing-extensions` in Python 3.8+
After more detailed analysis of how to implement Python version-specific
type annotations using SpaCy, it has been determined that by branching
on a comparison against `sys.version_info` can be statically analyzed by
Mypy well enough to enable us to conditionally use
`typing_extensions.Literal`. This means that we no longer need to
install `typing_extensions` for Python versions greater than or equal to
3.8! 🎉
These changes revert previous changes installing `typing-extensions`
regardless of Python version and modify how we import the `Literal` type
to ensure that Mypy treats it properly.
* resolve mypy errors for Strict pydantic types
* refactor code to avoid missing return statement
* fix types of convert CLI command
* avoid list-set confustion in debug_data
* fix typo and formatting
* small fixes to avoid type ignores
* fix types in profile CLI command and make it more efficient
* type fixes in projects CLI
* put one ignore back
* type fixes for render
* fix render types - the sequel
* fix BaseDefault in language definitions
* fix type of noun_chunks iterator - yields tuple instead of span
* fix types in language-specific modules
* 🏷 Expand accepted inputs of `get_string_id`
`get_string_id` accepts either a string (in which case it returns its
ID) or an ID (in which case it immediately returns the ID). These
changes extend the type annotation of `get_string_id` to indicate that
it can accept either strings or IDs.
* 🏷 Handle override types in `combine_score_weights`
The `combine_score_weights` function allows users to pass an `overrides`
mapping to override data extracted from the `weights` argument. Since it
allows `Optional` dictionary values, the return value may also include
`Optional` dictionary values.
These changes update the type annotations for `combine_score_weights` to
reflect this fact.
* 🏷 Fix tokenizer serialization method signatures in `DummyTokenizer`
* 🏷 Fix redefinition of `wandb_logger`
These changes fix the redefinition of `wandb_logger` by giving a
separate name to each `WandbLogger` version. For
backwards-compatibility, `spacy.train` still exports `wandb_logger_v3`
as `wandb_logger` for now.
* more fixes for typing in language
* type fixes in model definitions
* 🏷 Annotate `_RandomWords.probs` as `NDArray`
* 🏷 Annotate `tok2vec` layers to help Mypy
* 🐛 Fix `_RandomWords.probs` type annotations for Python 3.6
Also remove an import that I forgot to move to the top of the module 😅
* more fixes for matchers and other pipeline components
* quick fix for entity linker
* fixing types for spancat, textcat, etc
* bugfix for tok2vec
* type annotations for scorer
* add runtime_checkable for Protocol
* type and import fixes in tests
* mypy fixes for training utilities
* few fixes in util
* fix import
* 🐵 Remove unused `# type: ignore` directives
* 🏷 Annotate `Language._components`
* 🏷 Annotate `spacy.pipeline.Pipe`
* add doc as property to span.pyi
* small fixes and cleanup
* explicit type annotations instead of via comment
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: svlandeg <sofie.vanlandeghem@gmail.com>
Co-authored-by: svlandeg <svlandeg@github.com>
* use language-matching to allow language code aliases
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* link to "IETF language tags" in docs
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* Make requirements consistent
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* change "two-letter language ID" to "IETF language tag" in language docs
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* use langcodes 3.2 and handle language-tag errors better
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* all unknown language codes are ImportErrors
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
Co-authored-by: Elia Robyn Speer <elia@explosion.ai>
* Use morph for extra Japanese tokenizer info
Previously Japanese tokenizer info that didn't correspond to Token
fields was put in user data. Since spaCy core should avoid touching user
data, this moves most information to the Token.morph attribute. It also
adds the normalized form, which wasn't exposed before.
The subtokens, which are a list of full tokens, are still added to user
data, except with the default tokenizer granualarity. With the default
tokenizer settings the subtokens are all None, so in this case the user
data is simply not set.
* Update tests
Also adds a new test for norm data.
* Update docs
* Add Japanese morphologizer factory
Set the default to `extend=True` so that the morphologizer does not
clobber the values set by the tokenizer.
* Use the norm_ field for normalized forms
Before this commit, normalized forms were put in the "norm" field in the
morph attributes. I am not sure why I did that instead of using the
token morph, I think I just forgot about it.
* Skip test if sudachipy is not installed
* Fix import
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Add link to Discussions FAQ
* Remove old FAQ entries
I think these are no longer relevant.
- no-cache-dir: affected pip versions are *very* old now
- narrow unicode: not an issue from py3.3+
- utf-8 osx: upstream bug closed in 2019
Some of the other issues are also maybe not frequent.
* factor out the WandB logger into spacy-loggers
Signed-off-by: Elia Robyn Speer <gh@arborelia.net>
* depend on spacy-loggers so they are available
Signed-off-by: Elia Robyn Speer <gh@arborelia.net>
* remove docs of spacy.WandbLogger.v2 (moved to spacy-loggers)
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* Version number suggestions from code review
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* update references to WandbLogger
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* make order of deps more consistent
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
Co-authored-by: Elia Robyn Speer <elia@explosion.ai>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Fix surprises when asking for the root of a git repo
In the case of the first asset I wanted to get from git, the data I
wanted was the entire repository. I tried leaving "path" blank, which
gave a less-than-helpful error, and then I tried `path: "/"`, which
started copying my entire filesystem into the project. The path I should
have used was "".
I've made two changes to make this smoother for others:
- The 'path' within a git clone defaults to ""
- If the path points outside of the tmpdir that the git clone goes
into, we fail with an error
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* use a descriptive error instead of a default
plus some minor fixes from PR review
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* check for None values in assets
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
Co-authored-by: Elia Robyn Speer <elia@explosion.ai>
* Add textcat docs
* Add NER docs
* Add Entity Linker docs
* Add assigned fields docs for the tagger
This also adds a preamble, since there wasn't one.
* Add morphologizer docs
* Add dependency parser docs
* Update entityrecognizer docs
This is a little weird because `Doc.ents` is the only thing assigned to,
but it's actually a bidirectional property.
* Add token fields for entityrecognizer
* Fix section name
* Add entity ruler docs
* Add lemmatizer docs
* Add sentencizer/recognizer docs
* Update website/docs/api/entityrecognizer.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update website/docs/api/entityruler.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update website/docs/api/tagger.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update website/docs/api/entityruler.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update type for Doc.ents
This was `Tuple[Span, ...]` everywhere but `Tuple[Span]` seems to be
correct.
* Run prettier
* Apply suggestions from code review
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Run prettier
* Add transformers section
This basically just moves and renames the "custom attributes" section
from the bottom of the page to be consistent with "assigned attributes"
on other pages.
I looked at moving the paragraph just above the section into the
section, but it includes the unrelated registry additions, so it seemed
better to leave it unchanged.
* Make table header consistent
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* test for error after Doc has been garbage collected
* warn about using a SpanGroup when the Doc has been garbage collected
* add warning to the docs
* rephrase slightly
* raise error instead of warning
* update
* move warning to doc property
* Add training data section
Not entirely sure this is in the right location on the page - maybe it
should be after quickstart?
* Add pointer from binary format to training data section
* Minor cleanup
* Add to ToC, fix filename
* Update website/docs/usage/training.md
Co-authored-by: Ines Montani <ines@ines.io>
* Update website/docs/usage/training.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update website/docs/usage/training.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Move the training data section further down the page
* Update website/docs/usage/training.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update website/docs/usage/training.md
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Run prettier
Co-authored-by: Ines Montani <ines@ines.io>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Allow passing in array vars for speedup
This fixes#8845. Not sure about the docstring changes here...
* Update docs
Types maybe need more detail? Maybe not?
* Run prettier on docs
* Update spacy/tokens/span.pyx
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Add scores to output in spancat
This exposes the scores as an attribute on the SpanGroup. Includes a
basic test.
* Add basic doc note
* Vectorize score calcs
* Add "annotation format" section
* Update website/docs/api/spancategorizer.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Clean up doc section
* Ran prettier on docs
* Get arrays off the gpu before iterating over them
* Remove int() calls
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Support list values and IS_INTERSECT in Matcher
* Support list values as token attributes for set operators, not just as
pattern values.
* Add `IS_INTERSECT` operator.
* Fix incorrect `ISSUBSET` and `ISSUPERSET` in schema and docs.
* Rename IS_INTERSECT to INTERSECTS
* Raise an error for textcat with <2 labels
Raise an error if initializing a `textcat` component without at least
two labels.
* Add similar note to docs
* Update positive_label description in API docs
* Draft spancat model
* Add spancat model
* Add test for extract_spans
* Add extract_spans layer
* Upd extract_spans
* Add spancat model
* Add test for spancat model
* Upd spancat model
* Update spancat component
* Upd spancat
* Update spancat model
* Add quick spancat test
* Import SpanCategorizer
* Fix SpanCategorizer component
* Import SpanGroup
* Fix span extraction
* Fix import
* Fix import
* Upd model
* Update spancat models
* Add scoring, update defaults
* Update and add docs
* Fix type
* Update spacy/ml/extract_spans.py
* Auto-format and fix import
* Fix comment
* Fix type
* Fix type
* Update website/docs/api/spancategorizer.md
* Fix comment
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Better defense
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix labels list
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update spacy/ml/extract_spans.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update spacy/pipeline/spancat.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Set annotations during update
* Set annotations in spancat
* fix imports in test
* Update spacy/pipeline/spancat.py
* replace MaxoutLogistic with LinearLogistic
* fix config
* various small fixes
* remove set_annotations parameter in update
* use our beloved tupley format with recent support for doc.spans
* bugfix to allow renaming the default span_key (scores weren't showing up)
* use different key in docs example
* change defaults to better-working parameters from project (WIP)
* register spacy.extract_spans.v1 for legacy purposes
* Upd dev version so can build wheel
* layers instead of architectures for smaller building blocks
* Update website/docs/api/spancategorizer.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update website/docs/api/spancategorizer.md
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Include additional scores from overrides in combined score weights
* Parameterize spans key in scoring
Parameterize the `SpanCategorizer` `spans_key` for scoring purposes so
that it's possible to evaluate multiple `spancat` components in the same
pipeline.
* Use the (intentionally very short) default spans key `sc` in the
`SpanCategorizer`
* Adjust the default score weights to include the default key
* Adjust the scorer to use `spans_{spans_key}` as the prefix for the
returned score
* Revert addition of `attr_name` argument to `score_spans` and adjust
the key in the `getter` instead.
Note that for `spancat` components with a custom `span_key`, the score
weights currently need to be modified manually in
`[training.score_weights]` for them to be available during training. To
suppress the default score weights `spans_sc_p/r/f` during training, set
them to `null` in `[training.score_weights]`.
* Update website/docs/api/scorer.md
* Fix scorer for spans key containing underscore
* Increment version
* Add Spans to Evaluate CLI (#8439)
* Add Spans to Evaluate CLI
* Change to spans_key
* Add spans per_type output
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Fix spancat GPU issues (#8455)
* Fix GPU issues
* Require thinc >=8.0.6
* Switch to glorot_uniform_init
* Fix and test ngram suggester
* Include final ngram in doc for all sizes
* Fix ngrams for docs of the same length as ngram size
* Handle batches of docs that result in no ngrams
* Add tests
Co-authored-by: Ines Montani <ines@ines.io>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: svlandeg <sofie.vanlandeghem@gmail.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Nirant <NirantK@users.noreply.github.com>
* Support a cfg field in transition system
* Make NER 'has gold' check use right alignment for span
* Pass 'negative_samples_key' property into NER transition system
* Add field for negative samples to NER transition system
* Check neg_key in NER has_gold
* Support negative examples in NER oracle
* Test for negative examples in NER
* Fix name of config variable in NER
* Remove vestiges of old-style partial annotation
* Remove obsolete tests
* Add comment noting lack of support for negative samples in parser
* Additions to "neg examples" PR (#8201)
* add custom error and test for deprecated format
* add test for unlearning an entity
* add break also for Begin's cost
* add negative_samples_key property on Parser
* rename
* extend docs & fix some older docs issues
* add subclass constructors, clean up tests, fix docs
* add flaky test with ValueError if gold parse was not found
* remove ValueError if n_gold == 0
* fix docstring
* Hack in environment variables to try out training
* Remove hack
* Remove NER hack, and support 'negative O' samples
* Fix O oracle
* Fix transition parser
* Remove 'not O' from oracle
* Fix NER oracle
* check for spans in both gold.ents and gold.spans and raise if so, to prevent memory access violation
* use set instead of list in consistency check
Co-authored-by: svlandeg <sofie.vanlandeghem@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* implement textcat resizing for TextCatCNN
* resizing textcat in-place
* simplify code
* ensure predictions for old textcat labels remain the same after resizing (WIP)
* fix for softmax
* store softmax as attr
* fix ensemble weight copy and cleanup
* restructure slightly
* adjust documentation, update tests and quickstart templates to use latest versions
* extend unit test slightly
* revert unnecessary edits
* fix typo
* ensemble architecture won't be resizable for now
* use resizable layer (WIP)
* revert using resizable layer
* resizable container while avoid shape inference trouble
* cleanup
* ensure model continues training after resizing
* use fill_b parameter
* use fill_defaults
* resize_layer callback
* format
* bump thinc to 8.0.4
* bump spacy-legacy to 3.0.6
* Update cats score names in Scorer API docs
* Refer to performance in meta
* Update package naming/versions, lemmatizer details
* Minor formatting fixes
* Provide more explanation for cats_score_desc
* Provide language-specific lemmatizer defaults in API docs
Co-authored-by: Paul O'Leary McCann <polm@dampfkraft.com>
* unit test for pickling KB
* add pickling test for NEL
* KB to_bytes and from_bytes
* NEL to_bytes and from_bytes
* xfail pickle tests for now
* fix docs
* cleanup
* Minor updates to quickstart settings/instructions
* set default value of textcat exclusive to `false` until the default
checkbox behavior is updated
* add the `morphologizer` to the list of components
* add a note that v3.0.6+ is required
* Switch to warning above quickstart
* Undo changes to textcat default in quickstart
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
